[PATCH v4 09/10] ARM: dts: samsung: exynos4212-tab3: Add USB connector node
From: Artur Weber <aweber.kernel@gmail.com>
Date: 2024-08-16 08:19:33
Also in:
linux-devicetree, linux-pm, linux-samsung-soc, lkml
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, the rest · Maintainers:
Krzysztof Kozlowski, Peter Griffin, Linus Torvalds
Add a subnode to the MAX77693 MFD for the MUIC and connect the USB connector node to the charger to allow for charger type/OTG cable detection. Tested-by: Henrik Grimler <redacted> Signed-off-by: Artur Weber <aweber.kernel@gmail.com> --- arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index 3c905bfedd96..7309b4e1cc3d 100644
--- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi@@ -157,6 +157,17 @@ charger_reg: CHARGER { }; }; + muic { + compatible = "maxim,max77693-muic"; + + usb_conn: connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + charger { compatible = "maxim,max77693-charger"; monitored-battery = <&battery>;
@@ -166,6 +177,8 @@ charger { maxim,thermal-regulation-celsius = <100>; maxim,battery-overcurrent-microamp = <3500000>; maxim,charge-input-threshold-microvolt = <4300000>; + + maxim,usb-connector = <&usb_conn>; }; }; };
--
2.46.0