On 29.07.2024 09:56, Varshini Rajendran wrote:

This patch series adds support for the new SoC family - sam9x7.
 - The device tree, configs and drivers are added
 - Clock driver for sam9x7 is added
 - Support for basic peripherals is added
 - Target board SAM9X75 Curiosity is added

[ ... ]

 Changes in v6:
 --------------

 - Addressed all the review comments in the patches
 - Picked up all Acked-by and Reviewed-by tags
 - Reverted the IRQ patch to that of version 3 of the same series
 - All the specific changes are captured in the corresponding patches

[ ... ]

Varshini Rajendran (26):
  dt-bindings: atmel-sysreg: add sam9x7
  ARM: at91: pm: add support for sam9x7 SoC family
  ARM: at91: pm: add sam9x7 SoC init config
  ARM: at91: add support in SoC driver for new sam9x7

Applied to at91-soc, thanks!

  dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7
  dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller
  clk: at91: clk-sam9x60-pll: re-factor to support individual core freq
    outputs
  clk: at91: sam9x7: add support for HW PLL freq dividers
  clk: at91: sama7g5: move mux table macros to header file
  dt-bindings: clock: at91: Allow PLLs to be exported and referenced in
    DT
  clk: at91: sam9x7: add sam9x7 pmc driver

Applied to clk-microchip, thanks!

  ARM: at91: Kconfig: add config flag for SAM9X7 SoC

Applied to at91-soc, thanks!

  ARM: configs: at91: enable config flags for sam9x7 SoC family

Applied to at91-defconfig, thanks!