Add support for Amlogic HCI UART, including dt-binding,
and Amlogic Bluetooth driver.

Signed-off-by: Yang Li <yang.li@amlogic.com>
---
Changes in v4:
- Modified the compatible list in the DT binding.
- Reduced the boot delay from 350ms to 60ms.
- Minor fixes.
- Link to v3: https://lore.kernel.org/r/20240802-btaml-v3-0-d8110bf9963f@amlogic.com (local)

Changes in v3:
- Updated the properties within the device tree binding file.
- Remove the "antenna-number" property.
- Performed code optimization for improved efficiency and readability.
- Link to v2: https://lore.kernel.org/r/20240718-btaml-v2-0-1392b2e21183@amlogic.com (local)

Changes in v2:
- Introduce a regulator for powering up the Bluetooth chip instead of power sequencing.
- Use the GPIO Consumer API to manipulate the GPIO pins instead of the legacy API.
- Minor fixes.
- Link to v1: https://lore.kernel.org/r/20240705-btaml-v1-0-7f1538f98cef@amlogic.com (local)

---
Yang Li (3):
      dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth
      Bluetooth: hci_uart: Add support for Amlogic HCI UART
      MAINTAINERS: Add an entry for Amlogic HCI UART (M: Yang Li)

 .../bindings/net/bluetooth/amlogic,w155s2-bt.yaml  |  63 ++
 MAINTAINERS                                        |   7 +
 drivers/bluetooth/Kconfig                          |  12 +
 drivers/bluetooth/Makefile                         |   1 +
 drivers/bluetooth/hci_aml.c                        | 755 +++++++++++++++++++++
 drivers/bluetooth/hci_ldisc.c                      |   8 +-
 drivers/bluetooth/hci_uart.h                       |   8 +-
 7 files changed, 851 insertions(+), 3 deletions(-)
---
base-commit: bd0b4dae74b0f0ee9ea37818e1c132b56a26d6dd
change-id: 20240418-btaml-f9d7b19724ab

Best regards,
-- 
Yang Li [off-list ref]