[PATCH v9 20/26] ARM: dts: aspeed: yosemite4: support medusa board adc sensors
From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Date: 2024-06-26 09:09:10
Also in:
linux-aspeed, linux-devicetree, lkml
Subsystem:
arm/aspeed machine support, the rest · Maintainers:
Joel Stanley, Andrew Jeffery, Linus Torvalds
Add ina233/ina28 support for medusa board adc sensors Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> --- .../dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index f4e37187bd5b..bacaa2208734 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts@@ -915,6 +915,19 @@ power-sensor@40 { reg = <0x40>; }; + power-sensor@41 { + compatible = "ti,ina233"; + resistor-calibration = /bits/ 16 <0x0a00>; + current-lsb= /bits/ 16 <0x0001>; + reg = <0x41>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + shunt-resistor = <1000>; + reg = <0x44>; + }; + temperature-sensor@48 { compatible = "ti,tmp75"; reg = <0x48>;
--
2.25.1