[PATCH 07/10] iio: adc: ti-adc108s102: use devm_regulator_get_enable_read_voltage()
From: David Lechner <dlechner@baylibre.com>
Date: 2024-06-21 22:12:09
Also in:
linux-aspeed, linux-iio, lkml
Subsystem:
iio subsystem and drivers, the rest · Maintainers:
Jonathan Cameron, Linus Torvalds
Use devm_regulator_get_enable_read_voltage() to simplify the code. Signed-off-by: David Lechner <dlechner@baylibre.com> --- drivers/iio/adc/ti-adc108s102.c | 28 +++------------------------- 1 file changed, 3 insertions(+), 25 deletions(-)
diff --git a/drivers/iio/adc/ti-adc108s102.c b/drivers/iio/adc/ti-adc108s102.c
index 69fcbbc7e418..9758ac801310 100644
--- a/drivers/iio/adc/ti-adc108s102.c
+++ b/drivers/iio/adc/ti-adc108s102.c@@ -58,7 +58,6 @@ struct adc108s102_state { struct spi_device *spi; - struct regulator *reg; u32 va_millivolt; /* SPI transfer used by triggered buffer handler*/ struct spi_transfer ring_xfer;
@@ -216,11 +215,6 @@ static const struct iio_info adc108s102_info = { .update_scan_mode = &adc108s102_update_scan_mode, }; -static void adc108s102_reg_disable(void *reg) -{ - regulator_disable(reg); -} - static int adc108s102_probe(struct spi_device *spi) { struct adc108s102_state *st;
@@ -236,25 +230,9 @@ static int adc108s102_probe(struct spi_device *spi) if (ACPI_COMPANION(&spi->dev)) { st->va_millivolt = ADC108S102_VA_MV_ACPI_DEFAULT; } else { - st->reg = devm_regulator_get(&spi->dev, "vref"); - if (IS_ERR(st->reg)) - return PTR_ERR(st->reg); - - ret = regulator_enable(st->reg); - if (ret < 0) { - dev_err(&spi->dev, "Cannot enable vref regulator\n"); - return ret; - } - ret = devm_add_action_or_reset(&spi->dev, adc108s102_reg_disable, - st->reg); - if (ret) - return ret; - - ret = regulator_get_voltage(st->reg); - if (ret < 0) { - dev_err(&spi->dev, "vref get voltage failed\n"); - return ret; - } + ret = devm_regulator_get_enable_read_voltage(&spi->dev, "vref"); + if (ret < 0) + return dev_err_probe(&spi->dev, ret, "failed get vref voltage\n"); st->va_millivolt = ret / 1000; }
--
2.45.2