[PATCH v3 1/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group
From: Potin Lai <hidden>
Date: 2024-06-20 08:45:55
Also in:
linux-aspeed, linux-devicetree, linux-gpio, lkml, openbmc
Subsystem:
aspeed pinctrl drivers, open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Andrew Jeffery, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not needed on the management controller side. Add NCSI group to distinguish the pin group between RMII and NCSI. - RMII pins: - RMIIXRCLKI - RMIIXRXD0 - RMIIXRXD1 - RMIIXCRSDV - RMIIXRXER - RMIIXRCLKO - RMIIXTXEN - RMIIXTXD0 - RMIIXTXD1 - NCSI pins: - RMIIXRCLKI - RMIIXRXD0 - RMIIXRXD1 - RMIIXCRSDV - RMIIXRXER - RMIIXTXEN - RMIIXTXD0 - RMIIXTXD1 Acked-by: Krzysztof Kozlowski <redacted> Signed-off-by: Potin Lai <redacted> --- .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 00b6974a5ed3d..3f02dc94a7ce2 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml@@ -337,6 +337,8 @@ additionalProperties: - MDIO2 - MDIO3 - MDIO4 + - NCSI3 + - NCSI4 - NCTS1 - NCTS2 - NCTS3
--
2.31.1