[PATCH net-next v4 3/5] dt-bindings: net: Add IEP interrupt
From: Diogo Ivo <hidden>
Date: 2024-06-17 15:22:36
Also in:
linux-devicetree, lkml, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest, ti icssg ethernet driver (icssg) · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The IEP interrupt is used in order to support both capture events, where an incoming external signal gets timestamped on arrival, and compare events, where an interrupt is generated internally when the IEP counter reaches a programmed value. Signed-off-by: Diogo Ivo <redacted> --- Documentation/devicetree/bindings/net/ti,icss-iep.yaml | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
index f5c22d6dcaee..e36e3a622904 100644
--- a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
+++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml@@ -28,6 +28,15 @@ properties: maxItems: 1 description: phandle to the IEP source clock + interrupts: + maxItems: 1 + description: + Interrupt specifier for capture/compare IRQ. + + interrupt-names: + items: + - const: iep_cap_cmp + required: - compatible - reg
--
2.45.2