[PATCH v2 07/19] net: mdio: mscc-miim: Handle the switch reset
From: Herve Codina <herve.codina@bootlin.com>
Date: 2024-05-27 16:15:12
Also in:
linux-devicetree, linux-pci, lkml, netdev
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The mscc-miim device can be impacted by the switch reset, at least when this device is part of the LAN966x PCI device. Handle this newly added (optional) resets property. Signed-off-by: Herve Codina <herve.codina@bootlin.com> --- drivers/net/mdio/mdio-mscc-miim.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/net/mdio/mdio-mscc-miim.c b/drivers/net/mdio/mdio-mscc-miim.c
index c29377c85307..62c47e0dd142 100644
--- a/drivers/net/mdio/mdio-mscc-miim.c
+++ b/drivers/net/mdio/mdio-mscc-miim.c@@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/property.h> #include <linux/regmap.h> +#include <linux/reset.h> #define MSCC_MIIM_REG_STATUS 0x0 #define MSCC_MIIM_STATUS_STAT_PENDING BIT(2)
@@ -271,10 +272,17 @@ static int mscc_miim_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct regmap *mii_regmap, *phy_regmap; struct device *dev = &pdev->dev; + struct reset_control *reset; struct mscc_miim_dev *miim; struct mii_bus *bus; int ret; + reset = devm_reset_control_get_optional_shared(dev, "switch"); + if (IS_ERR(reset)) + return dev_err_probe(dev, PTR_ERR(reset), "Failed to get reset\n"); + + reset_control_reset(reset); + mii_regmap = ocelot_regmap_from_resource(pdev, 0, &mscc_miim_regmap_config); if (IS_ERR(mii_regmap))
--
2.45.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel