[PATCH 2/3] net: dsa: mt7530: fix disabling EEE on failure on MT7531 and MT7988
DORMANTno replies
From: Arınç ÜNAL via B4 Relay <devnull+arinc.unal.arinc9.com@kernel.org>
Date: 2024-03-18 07:47:09
Also in:
lkml
Subsystem:
mediatek switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Chester A. Unal, Daniel Golle, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
From: Arınç ÜNAL <redacted>
The MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 bits let the
PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits determine the 1G/100 EEE
abilities of the MAC. If MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 are
unset, the abilities are left to be determined by PHY auto polling.
The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
made it so that the PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits are set on
mt753x_phylink_mac_link_up(). But it did not set the MT7531_FORCE_EEE1G and
MT7531_FORCE_EEE100 bits. Because of this, EEE will be enabled on the
switch MACs by polling the PHY, regardless of the result of phy_init_eee().
Define these bits and add them to MT7531_FORCE_MODE which is being used by
the subdriver. With this, EEE will be prevented from being enabled on the
switch MACs when phy_init_eee() fails.
Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
Signed-off-by: Arınç ÜNAL <redacted>
---
drivers/net/dsa/mt7530.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 509ed5362236..5b99aeca34b4 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h@@ -299,11 +299,15 @@ enum mt7530_vlan_port_acc_frm { #define MT7531_FORCE_DPX BIT(29) #define MT7531_FORCE_RX_FC BIT(28) #define MT7531_FORCE_TX_FC BIT(27) +#define MT7531_FORCE_EEE100 BIT(26) +#define MT7531_FORCE_EEE1G BIT(25) #define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \ MT7531_FORCE_SPD | \ MT7531_FORCE_DPX | \ MT7531_FORCE_RX_FC | \ - MT7531_FORCE_TX_FC) + MT7531_FORCE_TX_FC | \ + MT7531_FORCE_EEE100 | \ + MT7531_FORCE_EEE1G) #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
--
2.40.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel