Re: [PATCH v5 7/7] arm64: dts: allwinner: h616: Add thermal sensor and zones
From: Jernej Škrabec <jernej.skrabec@gmail.com>
Date: 2024-02-23 19:59:11
Also in:
linux-devicetree, linux-pm, linux-sunxi
Dne ponedeljek, 19. februar 2024 ob 16:36:39 CET je Andre Przywara napisal(a):
From: Martin Botka <redacted> There are four thermal sensors: - CPU - GPU - VE - DRAM Add the thermal sensor configuration and the thermal zones. Signed-off-by: Martin Botka <redacted> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
I can't cleanly apply patch on top of sunxi/dt-for-6.9. Can you please rebase? Best regards, Jernej
quoted hunk ↗ jump to hunk
--- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+)diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index 12ffabc79bcde..7c7d7c285505c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi@@ -9,6 +9,7 @@ #include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/reset/sun50i-h616-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>;@@ -138,6 +139,10 @@ sid: efuse@3006000 { reg = <0x03006000 0x1000>; #address-cells = <1>; #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@14 { + reg = <0x14 0x8>; + }; }; watchdog: watchdog@30090a0 {@@ -517,6 +522,19 @@ mdio0: mdio { }; }; + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-h616-ths"; + reg = <0x05070400 0x400>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + allwinner,sram = <&syscon>; + #thermal-sensor-cells = <1>; + }; + usbotg: usb@5100000 { compatible = "allwinner,sun50i-h616-musb", "allwinner,sun8i-h3-musb";@@ -761,4 +779,74 @@ r_rsb: rsb@7083000 { #size-cells = <0>; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 2>; + sustainable-power = <1000>; + + trips { + cpu_threshold: cpu-trip-0 { + temperature = <60000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_target: cpu-trip-1 { + temperature = <70000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_critical: cpu-trip-2 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 0>; + sustainable-power = <1100>; + + trips { + gpu_temp_critical: gpu-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ve-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + + trips { + ve_temp_critical: ve-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 3>; + + trips { + ddr_temp_critical: ddr-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + }; };
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel