Thread (16 messages) 16 messages, 2 authors, 2024-02-29
STALE849d
Revisions (17)
  1. v2 [diff vs current]
  2. v3 [diff vs current]
  3. v4 [diff vs current]
  4. v5 [diff vs current]
  5. v6 [diff vs current]
  6. v7 [diff vs current]
  7. v8 [diff vs current]
  8. v9 current
  9. v10 [diff vs current]
  10. v11 [diff vs current]
  11. v12 [diff vs current]
  12. v13 [diff vs current]
  13. v13 [diff vs current]
  14. v15 [diff vs current]
  15. v16 [diff vs current]
  16. v17 [diff vs current]
  17. v18 [diff vs current]

[PATCH net-next v9 10/13] net: ethtool: pse-pd: Target the command to the requested PHY

From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: 2024-02-28 11:47:49
Also in: lkml, netdev
Subsystem: networking [ethtool], networking [general], pse network driver, the rest · Maintainers: Andrew Lunn, Jakub Kicinski, "David S. Miller", Eric Dumazet, Paolo Abeni, Oleksij Rempel, Kory Maincent, Linus Torvalds

PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
V9: No changes
V8: No changes
V7: No changes
V6: Use dedicated policy
V5: Added-back an incorrectly removed check
V4: No changes
V3: No changes
V2: New patch
 net/ethtool/pse-pd.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index cc478af77111..be50d79122c4 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -28,15 +28,13 @@ struct pse_reply_data {
 /* PSE_GET */
 
 const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
-static int pse_get_pse_attributes(struct net_device *dev,
+static int pse_get_pse_attributes(struct phy_device *phydev,
 				  struct netlink_ext_ack *extack,
 				  struct pse_reply_data *data)
 {
-	struct phy_device *phydev = dev->phydev;
-
 	if (!phydev) {
 		NL_SET_ERR_MSG(extack, "No PHY is attached");
 		return -EOPNOTSUPP;
@@ -64,7 +62,7 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
 	if (ret < 0)
 		return ret;
 
-	ret = pse_get_pse_attributes(dev, info->extack, data);
+	ret = pse_get_pse_attributes(req_base->phydev, info->extack, data);
 
 	ethnl_ops_complete(dev);
 
@@ -109,7 +107,7 @@ static int pse_fill_reply(struct sk_buff *skb,
 /* PSE_SET */
 
 const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 	[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
 		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
 				 ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
@@ -124,7 +122,6 @@ ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
 static int
 ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	struct pse_control_config config = {};
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
@@ -132,7 +129,7 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 	/* this values are already validated by the ethnl_pse_set_policy */
 	config.admin_cotrol = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
 
-	phydev = dev->phydev;
+	phydev = req_info->phydev;
 	if (!phydev) {
 		NL_SET_ERR_MSG(info->extack, "No PHY is attached");
 		return -EOPNOTSUPP;
-- 
2.43.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help