Thread (3 messages) 3 messages, 3 authors, 2024-02-22
STALE865d LANDED

[PATCH] clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical

From: Daniel Golle <daniel@makrotopia.org>
Date: 2024-02-18 03:34:14
Also in: linux-clk, linux-mediatek, lkml
Subsystem: common clk framework, the rest · Maintainers: Michael Turquette, Stephen Boyd, Linus Torvalds

Without the SGM_REG_SEL clock enabled the cpu freezes if trying to
access registers used by MT7981 clock drivers itself.
Mark SGM_REG_SEL as critical to make sure it is always enabled to
prevent freezes on boot even if the Ethernet driver which prepares
and enables the clock is not loaded or probed at a later point.

Fixes: 813c3b53b55b ("clk: mediatek: add MT7981 clock support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/clk/mediatek/clk-mt7981-topckgen.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt7981-topckgen.c b/drivers/clk/mediatek/clk-mt7981-topckgen.c
index 682f4ca9e89ad..493aa11d3a175 100644
--- a/drivers/clk/mediatek/clk-mt7981-topckgen.c
+++ b/drivers/clk/mediatek/clk-mt7981-topckgen.c
@@ -357,8 +357,9 @@ static const struct mtk_mux top_muxes[] = {
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel",
 			     sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15,
 			     0x1C0, 21),
-	MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents,
-			     0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22),
+	MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents,
+				   0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22,
+				   CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
 	MUX_GATE_CLR_SET_UPD(CLK_TOP_EIP97B_SEL, "eip97b_sel", eip97b_parents,
 			     0x050, 0x054, 0x058, 24, 3, 31, 0x1C0, 23),
 	/* CLK_CFG_6 */
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help