Thread (7 messages) 7 messages, 2 authors, 2024-02-23
STALE863d

[PATCH v2 4/4] dt-bindings: display: simple: hardware can use several properties

From: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Date: 2024-02-17 11:04:48
Also in: dri-devel, linux-devicetree, lkml
Subsystem: drm drivers, drm drivers and misc gpu patches, drm panel drivers, open firmware and flattened device tree bindings, the rest · Maintainers: David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Neil Armstrong, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Setting a panel-timing in the device-tree overwrite the one specified in
the driver and set it as preferred.  In that case 'height-mm',
'width-mm' and 'panel-timing' are properties that can be use for simple
panels, according to panel-common.yaml

Fixes following warnings:
arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: 'height-mm', 'panel-timing', 'width-mm' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 Documentation/devicetree/bindings/display/panel/panel-simple.yaml | 3 +++
 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 634a10c6f2dd..c02cbbc7a100 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -352,6 +352,9 @@ properties:
   no-hpd: true
   hpd-gpios: true
   data-mapping: true
+  height-mm: true
+  width-mm: true
+  panel-timing: true
 
 if:
   not:
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help