Re: [PATCH 4/5] arm64: dts: qcom: sm8650: add GPU nodes

Add GPU nodes for the SM8650 platform.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 169 +++++++++++++++++++++++++++++++++++
 1 file changed, 169 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index c455ca4e6475..f6f9e603fb2f 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi

@@ -2582,6 +2582,131 @@ tcsr: clock-controller@1fc0000 {
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43051401", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";