[PATCH v4 2/7] arm64: dts: imx8ulp: add usb nodes
From: Xu Yang <xu.yang_2@nxp.com>
Date: 2024-01-19 07:13:23
Also in:
linux-devicetree, linux-usb
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Add USB nodes on i.MX8ULP platform which has 2 USB controllers. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> --- Changes in v2: - no changes Changes in v3: - no changes Changes in v4: - no changes --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 64 ++++++++++++++++++++++ 1 file changed, 64 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index c4a0082f30d3..ead1f57e08ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi@@ -28,6 +28,8 @@ aliases { serial1 = &lpuart5; serial2 = &lpuart6; serial3 = &lpuart7; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; }; cpus {
@@ -472,6 +474,68 @@ usdhc2: mmc@298f0000 { status = "disabled"; }; + usbotg1: usb@29900000 { + compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb"; + reg = <0x29900000 0x200>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc4 IMX8ULP_CLK_USB0>; + power-domains = <&scmi_devpd IMX8ULP_PD_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@29900200 { + compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc", + "fsl,imx6q-usbmisc"; + #index-cells = <1>; + reg = <0x29900200 0x200>; + status = "disabled"; + }; + + usbphy1: usb-phy@29910000 { + compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy"; + reg = <0x29910000 0x10000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>; + #phy-cells = <0>; + status = "disabled"; + }; + + usbotg2: usb@29920000 { + compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb"; + reg = <0x29920000 0x200>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc4 IMX8ULP_CLK_USB1>; + power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>; + phys = <&usbphy2>; + fsl,usbmisc = <&usbmisc2 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc2: usbmisc@29920200 { + compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc", + "fsl,imx6q-usbmisc"; + #index-cells = <1>; + reg = <0x29920200 0x200>; + status = "disabled"; + }; + + usbphy2: usb-phy@29930000 { + compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy"; + reg = <0x29930000 0x10000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>; + #phy-cells = <0>; + status = "disabled"; + }; + fec: ethernet@29950000 { compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec"; reg = <0x29950000 0x10000>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel