[PATCH 2/2] pinctrl: mediatek: Drop bogus slew rate register range for MT8192
From: Chen-Yu Tsai <wenst@chromium.org>
Date: 2024-01-31 07:19:20
Also in:
linux-gpio, linux-mediatek, lkml
Subsystem:
pin control subsystem, pin controller - mediatek, the rest · Maintainers:
Linus Walleij, Sean Wang, Linus Torvalds
The MT8192 does not support configuring pin slew rate. This is evident
from both the datasheet, and the fact that the driver points the slew
rate register range at the GPIO direction register range.
Drop the bogus setting.
Fixes: d32f38f2a8fc ("pinctrl: mediatek: Add pinctrl driver for mt8192")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
drivers/pinctrl/mediatek/pinctrl-mt8192.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
index e3a76381f7f4..3f8a9dbcb704 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c@@ -1379,7 +1379,6 @@ static const struct mtk_pin_reg_calc mt8192_reg_cals[PINCTRL_PIN_REG_MAX] = { [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8192_pin_dir_range), [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt8192_pin_di_range), [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt8192_pin_do_range), - [PINCTRL_PIN_REG_SR] = MTK_RANGE(mt8192_pin_dir_range), [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt8192_pin_smt_range), [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt8192_pin_ies_range), [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt8192_pin_pu_range),
--
2.43.0.429.g432eaa2c6b-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel