Thread (16 messages) 16 messages, 5 authors, 2024-03-25

Re: [PATCH v4 6/8] arm64: dts: qcom: sa8295p-adp: add max20411

From: Dmitry Baryshkov <hidden>
Date: 2024-01-25 22:29:52
Also in: linux-arm-msm, linux-clk, linux-devicetree, linux-pm, lkml

On Thu, 25 Jan 2024 at 23:06, Bjorn Andersson [off-list ref] wrote:
From: Bjorn Andersson <andersson@kernel.org>

The SA8295P ADP has a MAX20411 LDO regulator on I2C 12, supplying the
VDD_GFX pads. Enable the bus and add the maxim,max20411 device on the
bus.

Signed-off-by: Bjorn Andersson <redacted>
This doesn't match the From header.
quoted hunk ↗ jump to hunk
---
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 39 ++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index fd253942e5e5..bd0962f39fc5 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -266,6 +266,26 @@ &dispcc1 {
        status = "okay";
 };

+&i2c12 {
+       pinctrl-0 = <&qup1_i2c4_state>;
+       pinctrl-names = "default";
+
+       status = "okay";
+
+       vdd_gfx: regulator@39 {
+               compatible = "maxim,max20411";
+               reg = <0x39>;
+
+               regulator-min-microvolt = <800000>;
+               regulator-max-microvolt = <800000>;
+
+               enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>;
+
+               pinctrl-0 = <&max20411_en>;
+               pinctrl-names = "default";
+       };
+};
+
 &mdss0 {
        status = "okay";
 };
@@ -476,6 +496,10 @@ &pcie4_phy {
        status = "okay";
 };

+&qup1 {
+       status = "okay";
+};
+
 &qup2 {
        status = "okay";
 };
@@ -636,6 +660,14 @@ &xo_board_clk {

 /* PINCTRL */

+&pmm8540a_gpios {
+       max20411_en: max20411-en-state {
+               pins = "gpio2";
+               function = "normal";
+               output-enable;
+       };
+};
+
 &tlmm {
        pcie2a_default: pcie2a-default-state {
                clkreq-n-pins {
@@ -728,4 +760,11 @@ wake-n-pins {
                        bias-pull-up;
                };
        };
+
+       qup1_i2c4_state: qup1-i2c4-state {
+               pins = "gpio0", "gpio1";
+               function = "qup12";
+               drive-strength = <2>;
+               bias-pull-up;
+       };
 };

--
2.25.1

-- 
With best wishes
Dmitry

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help