Re: [PATCH] media: i2c: ar0521: fix spellos
From: Krzysztof Hałasa <khalasa@piap.pl>
Date: 2024-01-22 05:38:51
Also in:
linux-media, lkml
Hi Randy, Good catches, thanks for your work. Randy Dunlap [off-list ref] writes:
Fix spelling mistakes as reported by codespell.
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
quoted hunk
--- a/drivers/media/i2c/ar0521.c +++ b/drivers/media/i2c/ar0521.c@@ -314,7 +314,7 @@ static void ar0521_calc_pll(struct ar052 * In the clock tree: * MIPI_CLK = PIXEL_CLOCK * bpp / 2 / 2 * - * Generic pixel_rate to bus clock frequencey equation: + * Generic pixel_rate to bus clock frequency equation: * MIPI_CLK = V4L2_CID_PIXEL_RATE * bpp / lanes / 2 * * From which we derive the PIXEL_CLOCK to use in the clock tree:@@ -327,7 +327,7 @@ static void ar0521_calc_pll(struct ar052 * * TODO: in case we have less data lanes we have to reduce the desired * VCO not to exceed the limits specified by the datasheet and - * consequentially reduce the obtained pixel clock. + * consequently reduce the obtained pixel clock. */ pixel_clock = AR0521_PIXEL_CLOCK_RATE * 2 / sensor->lane_count; bpp = ar0521_code_to_bpp(sensor);@@ -806,7 +806,7 @@ static const struct initial_reg { REGS(be(0x3F00), be(0x0017), /* 3F00: BM_T0 */ be(0x02DD), /* 3F02: BM_T1 */ - /* 3F04: if Ana_gain less than 2, use noise_floor0, multipl */ + /* 3F04: if Ana_gain less than 2, use noise_floor0, multiply */ be(0x0020), /* 3F06: if Ana_gain between 4 and 7, use noise_floor2 and */ be(0x0040),
-- Krzysztof "Chris" Hałasa Sieć Badawcza Łukasiewicz Przemysłowy Instytut Automatyki i Pomiarów PIAP Al. Jerozolimskie 202, 02-486 Warszawa _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel