[PATCH v2 03/19] tty: serial: samsung: prepare for different IO types
From: Tudor Ambarus <tudor.ambarus@linaro.org>
Date: 2024-01-19 10:45:33
Also in:
linux-devicetree, linux-samsung-soc, linux-serial, lkml
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, the rest, tty layer and serial drivers · Maintainers:
Krzysztof Kozlowski, Peter Griffin, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
GS101's Connectivity Peripheral blocks (peric0/1 blocks) which include the I3C and USI (I2C, SPI, UART) only allow 32-bit register accesses. If using 8-bit register accesses, a SError Interrupt is raised causing the system unusable. Instead of specifying the reg-io-width = 4 everywhere, for each node, the requirement should be deduced from the compatible. Prepare the samsung tty driver to allow IO types different than UPIO_MEM. ``struct uart_port::iotype`` is an unsigned char where all its 8 bits are exposed to uapi. We can't make NULL checks on it to verify if it's set, thus always set it from the driver's data. Use u8 for the ``iotype`` member of ``struct s3c24xx_uart_info`` to emphasize that the iotype is an 8 bit mask. Reviewed-by: Krzysztof Kozlowski <redacted> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> --- drivers/tty/serial/samsung_tty.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 6fdb32b83346..9d3767021f9c 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c@@ -84,6 +84,7 @@ struct s3c24xx_uart_info { unsigned long clksel_mask; unsigned long clksel_shift; unsigned long ucon_mask; + u8 iotype; /* uart port features */
@@ -1741,7 +1742,6 @@ static void s3c24xx_serial_init_port_default(int index) { spin_lock_init(&port->lock); - port->iotype = UPIO_MEM; port->uartclk = 0; port->fifosize = 16; port->flags = UPF_BOOT_AUTOCONF;
@@ -1988,6 +1988,8 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) break; } + ourport->port.iotype = ourport->info->iotype; + if (np) { of_property_read_u32(np, "samsung,uart-fifosize", &ourport->port.fifosize);
@@ -2398,6 +2400,7 @@ static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { .name = "Samsung S3C6400 UART", .type = TYPE_S3C6400, .port_type = PORT_S3C6400, + .iotype = UPIO_MEM, .fifosize = 64, .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK,
@@ -2427,6 +2430,7 @@ static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { .name = "Samsung S5PV210 UART", .type = TYPE_S3C6400, .port_type = PORT_S3C6400, + .iotype = UPIO_MEM, .has_divslot = 1, .rx_fifomask = S5PV210_UFSTAT_RXMASK, .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
@@ -2456,6 +2460,7 @@ static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { .name = "Samsung Exynos UART", \ .type = TYPE_S3C6400, \ .port_type = PORT_S3C6400, \ + .iotype = UPIO_MEM, \ .has_divslot = 1, \ .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
@@ -2516,6 +2521,7 @@ static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = { .name = "Apple S5L UART", .type = TYPE_APPLE_S5L, .port_type = PORT_8250, + .iotype = UPIO_MEM, .fifosize = 16, .rx_fifomask = S3C2410_UFSTAT_RXMASK, .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
@@ -2545,6 +2551,7 @@ static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = { .name = "Axis ARTPEC-8 UART", .type = TYPE_S3C6400, .port_type = PORT_S3C6400, + .iotype = UPIO_MEM, .fifosize = 64, .has_divslot = 1, .rx_fifomask = S5PV210_UFSTAT_RXMASK,
--
2.43.0.429.g432eaa2c6b-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel