[PATCH v3] net: stmmac: fix FPE events losing

From: Jianheng Zhang <hidden>
Date: 2023-11-28 05:57:50
Also in: lkml, netdev
Subsystem: networking drivers, stmmac ethernet driver, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

The status bits of register MAC_FPE_CTRL_STS are clear on read. Using
32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and
dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt
handler missing FPE event status and leads to FPE handshaking failure and
retries.
To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure()
and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to
cache the control bits of MAC_FPE_CTRL_STS and to avoid reading
MAC_FPE_CTRL_STS in those methods.

Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
Reviewed-by: Serge Semin <redacted>
Signed-off-by: Jianheng Zhang <redacted>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c       | 45 +++++++++-------------
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h       |  4 +-
 .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c    |  3 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h         |  4 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  8 +++-
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c    |  1 +
 include/linux/stmmac.h                             |  1 +
 7 files changed, 36 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index e95d35f..8fd1675 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c

@@ -710,28 +710,22 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
 	}
 }
 
-void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			  u32 num_txq, u32 num_rxq,
 			  bool enable)
 {
 	u32 value;
 
-	if (!enable) {
-		value = readl(ioaddr + MAC_FPE_CTRL_STS);
-
-		value &= ~EFPE;
-
-		writel(value, ioaddr + MAC_FPE_CTRL_STS);
-		return;
+	if (enable) {
+		cfg->fpe_csr = EFPE;
+		value = readl(ioaddr + GMAC_RXQ_CTRL1);
+		value &= ~GMAC_RXQCTRL_FPRQ;
+		value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
+		writel(value, ioaddr + GMAC_RXQ_CTRL1);
+	} else {
+		cfg->fpe_csr = 0;
 	}
-
-	value = readl(ioaddr + GMAC_RXQ_CTRL1);
-	value &= ~GMAC_RXQCTRL_FPRQ;
-	value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
-	writel(value, ioaddr + GMAC_RXQ_CTRL1);
-
-	value = readl(ioaddr + MAC_FPE_CTRL_STS);
-	value |= EFPE;
-	writel(value, ioaddr + MAC_FPE_CTRL_STS);
+	writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS);
 }
 
 int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)

@@ -741,6 +735,9 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
 
 	status = FPE_EVENT_UNKNOWN;
 
+	/* Reads from the MAC_FPE_CTRL_STS register should only be performed
+	 * here, since the status flags of MAC_FPE_CTRL_STS are "clear on read"
+	 */
 	value = readl(ioaddr + MAC_FPE_CTRL_STS);
 
 	if (value & TRSP) {

@@ -766,19 +763,15 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
 	return status;
 }
 
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
+void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			     enum stmmac_mpacket_type type)
 {
-	u32 value;
+	u32 value = cfg->fpe_csr;
 
-	value = readl(ioaddr + MAC_FPE_CTRL_STS);
-
-	if (type == MPACKET_VERIFY) {
-		value &= ~SRSP;
+	if (type == MPACKET_VERIFY)
 		value |= SVER;
-	} else {
-		value &= ~SVER;
+	else if (type == MPACKET_RESPONSE)
 		value |= SRSP;
-	}
 
 	writel(value, ioaddr + MAC_FPE_CTRL_STS);
 }

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index 53c138d..34e6207 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h

@@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
 			 unsigned int ptp_rate);
 void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
 			   struct stmmac_extra_stats *x, u32 txqcnt);
-void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			  u32 num_txq, u32 num_rxq,
 			  bool enable);
 void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
+			     struct stmmac_fpe_cfg *cfg,
 			     enum stmmac_mpacket_type type);
 int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index 453e88b..a74e71d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c

@@ -1484,7 +1484,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
 	return 0;
 }
 
-static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq,
+static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+				   u32 num_txq,
 				   u32 num_rxq, bool enable)
 {
 	u32 value;

diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index b95d3e1..68aa2d5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h

@@ -412,9 +412,11 @@ struct stmmac_ops {
 			     unsigned int ptp_rate);
 	void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev,
 			       struct stmmac_extra_stats *x, u32 txqcnt);
-	void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
+	void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
+			      u32 num_txq, u32 num_rxq,
 			      bool enable);
 	void (*fpe_send_mpacket)(void __iomem *ioaddr,
+				 struct stmmac_fpe_cfg *cfg,
 				 enum stmmac_mpacket_type type);
 	int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
 };

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3e50fd5..7791e9b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
 	bool *hs_enable = &fpe_cfg->hs_enable;
 
 	if (is_up && *hs_enable) {
-		stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
+		stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
+					MPACKET_VERIFY);
 	} else {
 		*lo_state = FPE_STATE_OFF;
 		*lp_state = FPE_STATE_OFF;

@@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
 		/* If user has requested FPE enable, quickly response */
 		if (*hs_enable)
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						fpe_cfg,
 						MPACKET_RESPONSE);
 	}

@@ -7262,6 +7264,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
 		if (*lo_state == FPE_STATE_ENTERING_ON &&
 		    *lp_state == FPE_STATE_ENTERING_ON) {
 			stmmac_fpe_configure(priv, priv->ioaddr,
+					     fpe_cfg,
 					     priv->plat->tx_queues_to_use,
 					     priv->plat->rx_queues_to_use,
 					     *enable);

@@ -7280,6 +7283,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
 			netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
 				    *lo_state, *lp_state);
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						fpe_cfg,
 						MPACKET_VERIFY);
 		}
 		/* Sleep then retry */

@@ -7294,6 +7298,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
 	if (priv->plat->fpe_cfg->hs_enable != enable) {
 		if (enable) {
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
+						priv->plat->fpe_cfg,
 						MPACKET_VERIFY);
 		} else {
 			priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;

@@ -7754,6 +7759,7 @@ int stmmac_suspend(struct device *dev)
 	if (priv->dma_cap.fpesel) {
 		/* Disable FPE */
 		stmmac_fpe_configure(priv, priv->ioaddr,
+				     priv->plat->fpe_cfg,
 				     priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use, false);

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index ac41ef4..6ad3e0a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c

@@ -1079,6 +1079,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
 
 	priv->plat->fpe_cfg->enable = false;
 	stmmac_fpe_configure(priv, priv->ioaddr,
+			     priv->plat->fpe_cfg,
 			     priv->plat->tx_queues_to_use,
 			     priv->plat->rx_queues_to_use,
 			     false);

diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 0b4658a..dee5ad6 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h

@@ -175,6 +175,7 @@ struct stmmac_fpe_cfg {
 	bool hs_enable;				/* FPE handshake enable */
 	enum stmmac_fpe_state lp_fpe_state;	/* Link Partner FPE state */
 	enum stmmac_fpe_state lo_fpe_state;	/* Local station FPE state */
+	u32 fpe_csr;				/* MAC_FPE_CTRL_STS reg cache */
 };
 
 struct stmmac_safety_feature_cfg {

-- 
1.8.3.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help