This fixes the lost aliases for the IOT2050 series, fixes mini PCIe card
hangs, drops an unused device node, brings runtime pinmuxing for the
Arduino connector via debugfs. Finally, it enables PRU-based Ethernet on
PG2/M.2 device variants. PG1 devices still need changes to the TI driver
to enable them as well (work in progress).

Changes in v3:
 - remove some SR1.0 bits in the SR2.0-only icssg-prueth nodes

Changes in v2:
 - dropped spidev enabling - still looking for flexible and acceptable
   solution
 - added some missing signed-offs

Jan

Benedikt Niedermayr (1):
  arm64: dts: ti: iot2050: Definitions for runtime pinmuxing

Jan Kiszka (3):
  arm64: dts: ti: iot2050: Re-add aliases
  arm64: dts: ti: iot2050: Drop unused ecap0 PWM
  arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG2 devices

Su Bao Cheng (1):
  arm64: dts: ti: iot2050: Refactor the m.2 and minipcie power pin

 .../dts/ti/k3-am65-iot2050-common-pg1.dtsi    |  10 +-
 .../dts/ti/k3-am65-iot2050-common-pg2.dtsi    |   4 +-
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 824 +++++++++++++++++-
 .../dts/ti/k3-am6548-iot2050-advanced-m2.dts  |  12 +-
 4 files changed, 790 insertions(+), 60 deletions(-)

-- 
2.35.3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel