[PATCH v1 00/10] Add i2c-mux and eeprom devices for Meta Yosemite 4
From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Date: 2023-11-01 10:06:27
Also in:
linux-aspeed, linux-devicetree, lkml
Changelog:
- Add gpio and eeprom behind i2c-mux
- Remove redundant idle-state setting for i2c-mux
- Enable adc 15, wdt2,spi gpio for yosemite4 use
- Revise quad mode to dual mode to avoid WP pin influnece the SPI
- Revise power sensor adm1281 for yosemite4 schematic change
- Add gpio pca9506 I/O expander for yosemite4 use
- remove space for adm1272 compatible
- enable interrupt setting for pca9555
- add eeprom for yosemite4 medusa board/BSM use
- remove temperature sensor for yosemite4 schematic change
- add power sensor for power module reading
- Revise adc128d818 adc mode for yosemite4 schematic change
- Revise ina233 for yosemite4 schematic change
- Remove idle state setting for yosemite4 NIC connection
- Initialize bmc gpio state
Delphine CC Chiu (10):
ARM: dts: aspeed: yosemite4: Revise i2c-mux devices
ARM: dts: aspeed: yosemite4: Enable adc15
ARM: dts: aspeed: yosemite4: Enable spi-gpio setting
ARM: dts: aspeed: yosemite4: Enable watchdog2
ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode
ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic
change
ARM: dts: aspeed: yosemite4: Add gpio pca9506
ARM: dts: aspeed: yosemite4: Revise i2c11 and i2c12 schematic change
ARM: dts: aspeed: yosemite4: Revise i2c14 and i2c15 schematic change
ARM: dts: aspeed: yosemite4: Initialize bmc gpio state
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 1026 +++++++++++++++--
1 file changed, 949 insertions(+), 77 deletions(-)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel