[PATCH v2 03/12] dt-bindings: net: add phy-supply property for stm32
From: Christophe Roullier <hidden>
Date: 2023-09-28 12:25:30
Also in:
linux-devicetree, lkml, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Phandle to a regulator that provides power to the PHY. This regulator will be managed during the PHY power on/off sequence. Signed-off-by: Christophe Roullier <redacted> --- Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index 54fda8b052abc..f96b1589224ba 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml@@ -78,6 +78,9 @@ properties: encompases the glue register, the offset of the control register and the mask to set bitfield in control register + phy-supply: + description: PHY regulator + st,ext-phyclk: description: set this property in RMII mode when you have PHY without crystal 50MHz and want to
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel