Using the I2C host controller on the MT7981 SoC requires 4 clocks to
be enabled. One of them, the pmic clk, is only enabled in case
'mediatek,have-pmic' is also set which has other consequences which
are not desired in this case.

Allow defining a pmic clk even in case the 'mediatek,have-pmic' propterty
is not present and the bus is not used to connect to a pmic, but may
still require to enable the pmic clock.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/i2c/busses/i2c-mt65xx.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1a9b5a068ef1b..a8b5719c33729 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c

@@ -1442,15 +1442,19 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk))
 		return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk);
 
+	i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get_optional(&pdev->dev, "pmic");
+	if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) {
+		dev_err(&pdev->dev, "cannot get pmic clock\n");
+		return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk);