Re: [PATCH V2 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
From: Dmitry Baryshkov <hidden>
Date: 2023-08-25 11:45:36
Also in:
linux-arm-msm, linux-clk, linux-devicetree, lkml, netdev
On Fri, 25 Aug 2023 at 12:15, Devi Priya [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Add Networking Sub System Clock Controller(NSSCC) driver for ipq9574 based devices. Signed-off-by: Devi Priya <redacted> --- Changes in V2: - Added depends on ARM64 || COMPILE_TEST in Kconfig - Added module_platform_driver - Dropped patch [2/6] - clk: qcom: gcc-ipq9574: Mark nssnoc clocks as critical & added pm_clk for nssnoc clocks - Updated the uniphy clock names drivers/clk/qcom/Kconfig | 7 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/nsscc-ipq9574.c | 3109 ++++++++++++++++++++++++++++++ 3 files changed, 3117 insertions(+) create mode 100644 drivers/clk/qcom/nsscc-ipq9574.cdiff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index bd9bfb11b328..3ecc11e2c8e3 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig@@ -203,6 +203,13 @@ config IPQ_GCC_9574 i2c, USB, SD/eMMC, etc. Select this for the root clock of ipq9574. +config IPQ_NSSCC_9574 + tristate "IPQ9574 NSS Clock Controller" + depends on ARM64 || COMPILE_TEST + depends on IPQ_GCC_9574 + help + Support for NSS clock controller on ipq9574 devices. + config MSM_GCC_8660 tristate "MSM8660 Global Clock Controller" depends on ARM || COMPILE_TESTdiff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index 4790c8cca426..3f084928962e 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile@@ -30,6 +30,7 @@ obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o +obj-$(CONFIG_IPQ_NSSCC_9574) += nsscc-ipq9574.o obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.odiff --git a/drivers/clk/qcom/nsscc-ipq9574.c b/drivers/clk/qcom/nsscc-ipq9574.c new file mode 100644 index 000000000000..65bdb449ae5f --- /dev/null +++ b/drivers/clk/qcom/nsscc-ipq9574.c@@ -0,0 +1,3109 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/pm_clock.h> +#include <linux/pm_runtime.h> + +#include <dt-bindings/clock/qcom,ipq9574-nsscc.h> +#include <dt-bindings/reset/qcom,ipq9574-nsscc.h> + +#include "clk-alpha-pll.h" +#include "clk-branch.h" +#include "clk-pll.h" +#include "clk-rcg.h" +#include "clk-regmap.h" +#include "clk-regmap-divider.h" +#include "clk-regmap-mux.h" +#include "common.h" +#include "reset.h" + +/* Need to match the order of clocks in DT binding */ +enum { + DT_NSSNOC_NSSCC_CLK, + DT_NSSNOC_SNOC_CLK, + DT_NSSNOC_SNOC_1_CLK,
Not using the index makes it seem that these clocks are not used, until one scrolls down to pm_clks. BTW: The NSSNOC_SNOC clocks make it look like there is an interconnect here (not a simple NIU).
+ DT_BIAS_PLL_CC_CLK, + DT_BIAS_PLL_NSS_NOC_CLK, + DT_BIAS_PLL_UBI_NC_CLK, + DT_GCC_GPLL0_OUT_AUX, + DT_UNIPHY0_NSS_RX_CLK, + DT_UNIPHY0_NSS_TX_CLK, + DT_UNIPHY1_NSS_RX_CLK, + DT_UNIPHY1_NSS_TX_CLK, + DT_UNIPHY2_NSS_RX_CLK, + DT_UNIPHY2_NSS_TX_CLK, + DT_XO,
As I wrote, please move DT_XO closer to the beginning of the list.
+};
+
+enum {
+ P_BIAS_PLL_CC_CLK,
+ P_BIAS_PLL_NSS_NOC_CLK,
+ P_BIAS_PLL_UBI_NC_CLK,
+ P_GCC_GPLL0_OUT_AUX,
+ P_UBI32_PLL_OUT_MAIN,
+ P_UNIPHY0_NSS_RX_CLK,
+ P_UNIPHY0_NSS_TX_CLK,
+ P_UNIPHY1_NSS_RX_CLK,
+ P_UNIPHY1_NSS_TX_CLK,
+ P_UNIPHY2_NSS_RX_CLK,
+ P_UNIPHY2_NSS_TX_CLK,
+ P_XO,
+};
+
+static const struct alpha_pll_config ubi32_pll_config = {
+ .l = 0x3e,
+ .alpha = 0x6666,
+ .config_ctl_val = 0x200d4aa8,
+ .config_ctl_hi_val = 0x3c,
+ .main_output_mask = BIT(0),
+ .aux_output_mask = BIT(1),
+ .pre_div_val = 0x0,
+ .pre_div_mask = BIT(12),
+ .post_div_val = 0x0,
+ .post_div_mask = GENMASK(9, 8),
+ .alpha_en_mask = BIT(24),
+ .test_ctl_val = 0x1c0000c0,
+ .test_ctl_hi_val = 0x4000,
+};
+
+static struct clk_alpha_pll ubi32_pll_main = {
+ .offset = 0x28000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
+ .flags = SUPPORTS_DYNAMIC_UPDATE,
+ .clkr = {
+ .hw.init = &(const struct clk_init_data) {
+ .name = "ubi32_pll_main",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_XO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_huayra_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv ubi32_pll = {
+ .offset = 0x28000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
+ .width = 2,
+ .clkr.hw.init = &(const struct clk_init_data) {
+ .name = "ubi32_pll",
+ .parent_hws = (const struct clk_hw *[]) {
+ &ubi32_pll_main.clkr.hw
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+[skipped clock tables, LGTM]
+static const struct of_device_id nss_cc_ipq9574_match_table[] = {
+ { .compatible = "qcom,ipq9574-nsscc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, nss_cc_ipq9574_match_table);
+
+static int nss_cc_ipq9574_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+ struct qcom_cc_desc nsscc_ipq9574_desc = nss_cc_ipq9574_desc;
+
+ int ret;
+
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_pm_clk_create(&pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = of_pm_clk_add_clk(&pdev->dev, "nssnoc_nsscc");As we are switching to DT indices, better add new API that takes index rather than mixing indices and names.
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to acquire nssnoc_nsscc clock\n");
+ return ret;
+ }
+
+ ret = of_pm_clk_add_clk(&pdev->dev, "nssnoc_snoc");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to acquire nssnoc_snoc clock\n");
+ return ret;
+ }
+
+ ret = of_pm_clk_add_clk(&pdev->dev, "nssnoc_snoc_1");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to acquire nssnoc_snoc_1 clock\n");
+ return ret;
+ }
+
+ ret = pm_runtime_get(&pdev->dev);
+ if (ret)
+ return ret;
+
+ regmap = qcom_cc_map(pdev, &nsscc_ipq9574_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config);
+
+ return qcom_cc_really_probe(pdev, &nsscc_ipq9574_desc, regmap);
+}
+
+static const struct dev_pm_ops nss_cc_pm_ops = {
+ SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static struct platform_driver nss_cc_ipq9574_driver = {
+ .probe = nss_cc_ipq9574_probe,
+ .driver = {
+ .name = "qcom,nsscc-ipq9574",
+ .of_match_table = nss_cc_ipq9574_match_table,
+ .pm = &nss_cc_pm_ops,
+ },
+};
+
+module_platform_driver(nss_cc_ipq9574_driver);
+
+MODULE_DESCRIPTION("QTI NSS_CC IPQ9574 Driver");
+MODULE_LICENSE("GPL");
--
2.34.1-- With best wishes Dmitry _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel