[PATCH v2 02/15] arm64: dts: meson: a1: remove extra empty line before reset node
From: Dmitry Rokosov <hidden>
Date: 2023-08-23 21:37:29
Also in:
linux-amlogic, linux-clk, linux-devicetree, lkml
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
There should be only one empty line between device tree node definitions. Signed-off-by: Dmitry Rokosov <redacted> --- arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 1 - 1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 5d0c8e3966ce..42083d1bc8ca 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi@@ -83,7 +83,6 @@ apb: bus@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; - reset: reset-controller@0 { compatible = "amlogic,meson-a1-reset"; reg = <0x0 0x0 0x0 0x8c>;
--
2.36.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel