Thread (10 messages) 10 messages, 4 authors, 2023-08-21

Re: [PATCH V4 2/3] coresight: etm: Make cycle count threshold user configurable

From: Anshuman Khandual <hidden>
Date: 2023-08-21 02:29:18
Also in: linux-doc, lkml


On 8/18/23 18:34, Suzuki K Poulose wrote:
On 18/08/2023 14:01, Mike Leach wrote:
quoted
On Fri, 18 Aug 2023 at 12:25, Suzuki K Poulose [off-list ref] wrote:
quoted
On 18/08/2023 12:20, Anshuman Khandual wrote:
quoted
Cycle counting is enabled, when requested and supported but with a default
threshold value ETM_CYC_THRESHOLD_DEFAULT i.e 0x100 getting into TRCCCCTLR,
representing the minimum interval between cycle count trace packets.

This makes cycle threshold user configurable, from the user space via perf
event attributes. Although it falls back using ETM_CYC_THRESHOLD_DEFAULT,
in case no explicit request. As expected it creates a sysfs file as well.

/sys/bus/event_source/devices/cs_etm/format/cc_threshold

New 'cc_threshold' uses 'event->attr.config3' as no more space is available
in 'event->attr.config1' or 'event->attr.config2'.

Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <redacted>
Cc: James Clark <redacted>
Cc: Leo Yan <redacted>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Mike Leach <redacted>
Signed-off-by: Anshuman Khandual <redacted>
---
   drivers/hwtracing/coresight/coresight-etm-perf.c   |  2 ++
   drivers/hwtracing/coresight/coresight-etm4x-core.c | 12 ++++++++++--
   2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 5ca6278baff4..09f75dffae60 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -68,6 +68,7 @@ PMU_FORMAT_ATTR(preset,             "config:0-3");
   PMU_FORMAT_ATTR(sinkid,             "config2:0-31");
   /* config ID - set if a system configuration is selected */
   PMU_FORMAT_ATTR(configid,   "config2:32-63");
+PMU_FORMAT_ATTR(cc_threshold,        "config3:0-11");


   /*
@@ -101,6 +102,7 @@ static struct attribute *etm_config_formats_attr[] = {
       &format_attr_preset.attr,
       &format_attr_configid.attr,
       &format_attr_branch_broadcast.attr,
+     &format_attr_cc_threshold.attr,
       NULL,
   };
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 591fab73ee79..3193dafa7618 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -635,7 +635,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
       struct etmv4_config *config = &drvdata->config;
       struct perf_event_attr *attr = &event->attr;
       unsigned long cfg_hash;
-     int preset;
+     int preset, cc_threshold;

       /* Clear configuration from previous run */
       memset(config, 0, sizeof(struct etmv4_config));
@@ -658,7 +658,15 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
       if (attr->config & BIT(ETM_OPT_CYCACC)) {
               config->cfg |= TRCCONFIGR_CCI;
               /* TRM: Must program this for cycacc to work */
-             config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
+             cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK;
+             if (cc_threshold) {
+                     if (cc_threshold < drvdata->ccitmin)
+                             config->ccctlr = drvdata->ccitmin;
+                     else
+                             config->ccctlr = cc_threshold;
+             } else {
+                     config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
Ideally this must be the ccitmin ? Theoretically, default value could be
bigger than the minimum value supported by the implementation (i.e.,
ccitmin)

Suzuki
In order not to change existing behaviour unexpectedly this could be
re-ordered...

cc_threshold = attr->config3 & ETM_CYC_THRESHOLD_MASK;
if (!cc_threshold)
          cc_threshold = ETM_CYC_THRESHOLD_DEFAULT;
if (cc_threshold < drvdata->ccitmin)
          cc_threshold = drvdata->ccitmin
config->ccctlr = cc_threshold;
That sounds better, Thanks Mike
Sure, will change as suggested.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help