Thread (9 messages) 9 messages, 3 authors, 2023-08-23
STALE1053d
Revisions (13)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 current
  6. v6 [diff vs current]
  7. v7 [diff vs current]
  8. v8 [diff vs current]
  9. v9 [diff vs current]
  10. v10 [diff vs current]
  11. v11 [diff vs current]
  12. v12 [diff vs current]
  13. v13 [diff vs current]

[PATCH v5 1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller

From: Aleksandr Shubin <hidden>
Date: 2023-08-14 13:34:13
Also in: linux-devicetree, linux-pwm, linux-riscv, linux-sunxi, lkml
Subsystem: open firmware and flattened device tree bindings, pwm subsystem, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Uwe Kleine-König, Linus Torvalds

Allwinner's D1, T113-S3 and R329 SoCs have a new pwm
controller witch is different from the previous pwm-sun4i.

The D1 and T113 are identical in terms of peripherals,
they differ only in the architecture of the CPU core, and
even share the majority of their DT. Because of that,
using the same compatible makes sense.
The R329 is a different SoC though, and should have
a different compatible string added, especially as there
is a difference in the number of channels.

D1 and T113s SoCs have one PWM controller with 8 channels.
R329 SoC has two PWM controllers in both power domains, one of
them has 9 channels (CPUX one) and the other has 6 (CPUS one).

Add a device tree binding for them.

Signed-off-by: Aleksandr Shubin <redacted>
---
 .../bindings/pwm/allwinner,sun20i-pwm.yaml    | 85 +++++++++++++++++++
 1 file changed, 85 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
new file mode 100644
index 000000000000..9512d4bed322
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/allwinner,sun20i-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner D1, T113-S3 and R329 PWM
+
+maintainers:
+  - Aleksandr Shubin <privatesub2@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun20i-d1-pwm
+      - items:
+          - const: allwinner,sun20i-r329-pwm
+          - const: allwinner,sun20i-d1-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+  clocks:
+    items:
+      - description: 24 MHz oscillator
+      - description: Bus Clock
+
+  clock-names:
+    items:
+      - const: hosc
+      - const: bus
+
+  resets:
+    maxItems: 1
+
+  allwinner,pwm-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of PWM channels configured for this instance
+    enum: [6, 9]
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun20i-r329-pwm
+
+    then:
+      required:
+        - allwinner,pwm-channels
+
+    else:
+      properties:
+        allwinner,pwm-channels: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+  - clock-names
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun20i-d1-ccu.h>
+    #include <dt-bindings/reset/sun20i-d1-ccu.h>
+
+    pwm: pwm@2000c00 {
+      compatible = "allwinner,sun20i-d1-pwm";
+      reg = <0x02000c00 0x400>;
+      clocks = <&dcxo>, <&ccu CLK_BUS_PWM>;
+      clock-names = "hosc", "bus";
+      resets = <&ccu RST_BUS_PWM>;
+      #pwm-cells = <0x3>;
+    };
+
+...
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help