On Fri, 11 Aug 2023 16:17:34 +0530, Jai Luthra wrote:

From: Pratyush Yadav <redacted>

TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
parts together.

Signed-off-by: Pratyush Yadav <redacted>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jai Luthra <redacted>
---
NOTE:

This patch depends on
9536cc949235 ("media: dt-bindings: cadence-csi2rx: Convert to DT schema")
which is part of linux-next.

 .../bindings/media/ti,j721e-csi2rx-shim.yaml       | 100 +++++++++++++++++++++
 1 file changed, 100 insertions(+)

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml:
Error in referenced schema matching $id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.example.dtb: ticsi2rx@4500000: csi-bridge@4504000: False schema does not allow {'compatible': ['ti,j721e-csi2rx', 'cdns,csi2rx'], 'reg': [[72368128, 4096]], 'clocks': [[4294967295, 26, 2], [4294967295, 26, 0], [4294967295, 26, 2], [4294967295, 26, 2], [4294967295, 26, 3], [4294967295, 26, 3]], 'clock-names': ['sys_clk', 'p_clk', 'pixel_if0_clk', 'pixel_if1_clk', 'pixel_if2_clk', 'pixel_if3_clk'], 'phys': [[4294967295]], 'phy-names': ['dphy'], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[4294967295]], 'bus-type': [[4]], 'clock-lanes': [[0]], 'data-lanes': [[1, 2]]}}}}
	from schema $id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml#
Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.example.dtb: /example-0/ticsi2rx@4500000/csi-bridge@4504000: failed to match any schema with compatible: ['ti,j721e-csi2rx', 'cdns,csi2rx']
Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.example.dtb: /example-0/ticsi2rx@4500000/csi-bridge@4504000: failed to match any schema with compatible: ['ti,j721e-csi2rx', 'cdns,csi2rx']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230811-upstream_csi-v9-12-8943f7a68a81@ti.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel