The driver registers a clock notifier by first getting the name of one
of its clocks it just registered, then uses the name to look up the
clock. The lookup is not needed, since each clock provider already
has a clock attached to it. Use that instead to get rid of a
__clk_lookup() call.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
Found this could be simplified while looking through some clk core code.


 drivers/clk/meson/meson8b.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 827e78fb16a8..c4336ac012bf 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c

@@ -3793,7 +3793,6 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
 {
 	struct meson8b_clk_reset *rstc;
 	struct device_node *parent_np;
-	const char *notifier_clk_name;
 	struct clk *notifier_clk;
 	struct regmap *map;
 	int i, ret;

@@ -3847,9 +3846,7 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
 	 * tricky programming sequence will be handled by the forthcoming
 	 * coordinated clock rates mechanism once that feature is released.
 	 */
-	notifier_clk_name = clk_hw_get_name(&meson8b_cpu_scale_out_sel.hw);
-	notifier_clk = __clk_lookup(notifier_clk_name);
-	ret = clk_notifier_register(notifier_clk, &meson8b_cpu_nb_data.nb);
+	ret = clk_notifier_register(meson8b_cpu_scale_out_sel.hw.clk, &meson8b_cpu_nb_data.nb);