[PATCH 1/9] i2c: bcm2835: Use dev_err_probe in probe function
From: Liao Chang <hidden>
Date: 2023-08-02 09:58:39
Also in:
linux-arm-msm, linux-i2c, lkml
Subsystem:
i2c subsystem, i2c subsystem host drivers, the rest · Maintainers:
Andi Shyti, Linus Torvalds
Use the dev_err_probe function instead of dev_err in the probe function so that the printed messge includes the return value and also handles -EPROBE_DEFER nicely. Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Liao Chang <redacted> --- drivers/i2c/busses/i2c-bcm2835.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 8ce6d3f49551..9af1a68269ab 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c@@ -430,10 +430,9 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) i2c_dev->bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk, i2c_dev); - if (IS_ERR(i2c_dev->bus_clk)) { - dev_err(&pdev->dev, "Could not register clock\n"); - return PTR_ERR(i2c_dev->bus_clk); - } + if (IS_ERR(i2c_dev->bus_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->bus_clk), + "Could not register clock\n"); ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &bus_clk_rate);
@@ -444,10 +443,9 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) } ret = clk_set_rate_exclusive(i2c_dev->bus_clk, bus_clk_rate); - if (ret < 0) { - dev_err(&pdev->dev, "Could not set clock frequency\n"); - return ret; - } + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "Could not set clock frequency\n"); ret = clk_prepare_enable(i2c_dev->bus_clk); if (ret) {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel