Re: [PATCH RESEND v2 1/7] mfd: mt6358: Add missing registers for LDO voltage calibration
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: 2023-07-21 08:54:16
Also in:
linux-devicetree, linux-mediatek, lkml
Il 21/07/23 10:28, Chen-Yu Tsai ha scritto:
Most of the LDOs, except the "VSRAM_*" ones, on the MT6358 and MT6366 PMICs support a finer output voltage calibration within the range of +0 mV to +100 mV with 10 mV step. Some of the registers for this function are missing from the register table.
Please mention that you're doing this addition *because* you're using those new definitions right after, and in the regulator driver: [...] In preparation for adding support for improved output voltage selection in mt6358-regulator, add the relevant missing registers for the same. [...] After which, Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
quoted hunk ↗ jump to hunk
Add the missing ones for MT6358. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> --- include/linux/mfd/mt6358/registers.h | 6 ++++++ 1 file changed, 6 insertions(+)diff --git a/include/linux/mfd/mt6358/registers.h b/include/linux/mfd/mt6358/registers.h index 3d33517f178c..5ea2590be710 100644 --- a/include/linux/mfd/mt6358/registers.h +++ b/include/linux/mfd/mt6358/registers.h@@ -262,6 +262,12 @@ #define MT6358_LDO_VBIF28_CON3 0x1db0 #define MT6358_VCAMA1_ANA_CON0 0x1e08 #define MT6358_VCAMA2_ANA_CON0 0x1e0c +#define MT6358_VFE28_ANA_CON0 0x1e10 +#define MT6358_VCN28_ANA_CON0 0x1e14 +#define MT6358_VBIF28_ANA_CON0 0x1e18 +#define MT6358_VAUD28_ANA_CON0 0x1e1c +#define MT6358_VAUX18_ANA_CON0 0x1e20 +#define MT6358_VXO22_ANA_CON0 0x1e24 #define MT6358_VCN33_ANA_CON0 0x1e28 #define MT6358_VSIM1_ANA_CON0 0x1e2c #define MT6358_VSIM2_ANA_CON0 0x1e30
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel