Thread (19 messages) 19 messages, 3 authors, 2023-07-03

Re: [PATCH v8 4/5] staging: bcm2835-audio: Register bcm2835-audio with vchiq_bus_type

From: Kieran Bingham <kieran.bingham@ideasonboard.com>
Date: 2023-06-28 22:52:01
Also in: linux-media, linux-staging, lkml

Quoting Umang Jain (2023-06-27 21:16:27)
Similar to how bcm2385-camera device is registered, register the
bcm2835-audio with vchiq_bus_type as well.
bcm2835-audio here and in the dir name, but registered as
bcm2835_audio... Personally I prefer bcm2835-audio ... but this is
already discussed earlier in the series.

quoted hunk ↗ jump to hunk
Signed-off-by: Umang Jain <redacted>
---
 .../vc04_services/bcm2835-audio/bcm2835.c       | 17 ++++++++---------
 .../interface/vchiq_arm/vchiq_arm.c             |  6 +-----
 2 files changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
index 00bc898b0189..f81a9a4fbd5d 100644
--- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
+++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright 2011 Broadcom Corporation.  All rights reserved. */
 
-#include <linux/platform_device.h>
-
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 
+#include "../interface/vchiq_arm/vchiq_arm.h"
+#include "../interface/vchiq_arm/vchiq_device.h"
 #include "bcm2835.h"
 
 static bool enable_hdmi;
@@ -268,9 +268,9 @@ static int snd_add_child_devices(struct device *device, u32 numchans)
        return 0;
 }
 
-static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
+static int snd_bcm2835_alsa_probe(struct vchiq_device *device)
 {
-       struct device *dev = &pdev->dev;
+       struct device *dev = &device->dev;
        int err;
 
        if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) {
@@ -292,20 +292,20 @@ static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_PM
 
-static int snd_bcm2835_alsa_suspend(struct platform_device *pdev,
+static int snd_bcm2835_alsa_suspend(struct vchiq_device *device,
                                    pm_message_t state)
 {
        return 0;
 }
 
-static int snd_bcm2835_alsa_resume(struct platform_device *pdev)
+static int snd_bcm2835_alsa_resume(struct vchiq_device *device)
 {
        return 0;
 }
 
 #endif
 
-static struct platform_driver bcm2835_alsa_driver = {
+static struct vchiq_driver bcm2835_alsa_driver = {
        .probe = snd_bcm2835_alsa_probe,
 #ifdef CONFIG_PM
        .suspend = snd_bcm2835_alsa_suspend,
@@ -315,9 +315,8 @@ static struct platform_driver bcm2835_alsa_driver = {
                .name = "bcm2835_audio",
        },
 };
-module_platform_driver(bcm2835_alsa_driver);
+module_vchiq_driver(bcm2835_alsa_driver);
 
 MODULE_AUTHOR("Dom Cobley");
 MODULE_DESCRIPTION("Alsa driver for BCM2835 chip");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:bcm2835_audio");
And same as with the bcm2385-camera ... I expect this might be required
in some form to support module autoloading?

But with that resolved:

Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
quoted hunk ↗ jump to hunk
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index 79d4d0eeb5fb..75da37fa6372 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -67,8 +67,6 @@ int vchiq_susp_log_level = VCHIQ_LOG_ERROR;
 DEFINE_SPINLOCK(msg_queue_spinlock);
 struct vchiq_state g_state;
 
-static struct platform_device *bcm2835_audio;
-
 struct vchiq_drvdata {
        const unsigned int cache_line_size;
        struct rpi_firmware *fw;
@@ -139,6 +137,7 @@ struct vchiq_pagelist_info {
  * the interface.
  */
 static const char *const vchiq_devices[] = {
+       "bcm2835_audio",
        "bcm2835-camera",
 };
 
@@ -1849,8 +1848,6 @@ static int vchiq_probe(struct platform_device *pdev)
                goto error_exit;
        }
 
-       bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio");
-
        for (i = 0; i < ARRAY_SIZE(vchiq_devices); i++) {
                err = vchiq_device_register(&pdev->dev, vchiq_devices[i]);
                if (err)
@@ -1868,7 +1865,6 @@ static int vchiq_probe(struct platform_device *pdev)
 
 static void vchiq_remove(struct platform_device *pdev)
 {
-       platform_device_unregister(bcm2835_audio);
        bus_for_each_dev(&vchiq_bus_type, NULL, NULL, vchiq_device_unregister);
        vchiq_debugfs_deinit();
        vchiq_deregister_chrdev();
-- 
2.39.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help