Re: [PATCH 0/2] Baisc devicetree support for Amlogic T7
From: Xianwei Zhao <xianwei.zhao@amlogic.com>
Date: 2023-06-27 06:13:55
Also in:
linux-amlogic, linux-devicetree, lkml
Hi Conor,
Thanks for you reply.
On 2023/6/26 18:02, Conor Dooley wrote:
[ EXTERNAL EMAIL ] Hey, On Mon, Jun 26, 2023 at 05:52:21PM +0800, Xianwei Zhao wrote:quoted
T7 is an advanced application processor designed for smart display. Add the new T7 SoC/board device tree bindings. Add basic support for the T7 based Amlogic AN400 board, which describes the following components: CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console.Lucas has already sent patches for the T7 SoC & is at v5:
https://lore.kernel.org/linux-devicetree/20230623081242.109131-1-tanure@linux.com/ (local)
There's been a bit of discussion there, and there serial stuff in particular is different in his series (it doesn't use always-on for examples). Could you please go and take a look at his series? Cheers, Conor.
AN400 is the reference board designed by Amlogic, which is different from Khadas VIM4. And T7 serial is the same as S4, so I follow S4 serial.
quoted
Xianwei Zhao (2): dt-bindings: arm: amlogic: add T7 based AN400 bindings arm64: dts: add support for T7 based Amlogic AN400 .../devicetree/bindings/arm/amlogic.yaml | 6 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/amlogic-t7-a311d2-an400.dts | 30 ++++ arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 156 ++++++++++++++++++ 4 files changed, 193 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi base-commit: 057889cb4244096ea5abcbe76ffd4d311c3078fe -- 2.37.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel