Re: [PATCH v2 3/3] riscv: dts: allwinner: d1: Add pwm node
From: Conor Dooley <conor@kernel.org>
Date: 2023-06-23 16:07:10
Also in:
linux-devicetree, linux-pwm, linux-riscv, linux-sunxi, lkml
On Fri, Jun 23, 2023 at 06:00:01PM +0300, Aleksandr Shubin wrote:
quoted hunk ↗ jump to hunk
D1 and T113s contain a pwm controller with 8 channels. This controller is supported by the sun20i-pwm driver. Add a device tree node for it. Signed-off-by: Aleksandr Shubin <redacted> --- arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 922e8e0e2c09..50f0f761527b 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi@@ -127,6 +127,18 @@ uart3_pb_pins: uart3-pb-pins { }; }; + pwm: pwm@2000c00 { + compatible = "allwinner,sun20i-d1-pwm"; + reg = <0x02000c00 0x400>; + clocks = <&dcxo>, + <&ccu CLK_BUS_PWM>; + clock-names = "hosc", "bus"; + resets = <&ccu RST_BUS_PWM>;
+ allwinner,pwm-channels = <8>;
This fails dtbs_check. Please test the dts against the bindings. Cheers, Conor.
+ status = "disabled";
+ #pwm-cells = <0x3>;
+ };
+
ccu: clock-controller@2001000 {
compatible = "allwinner,sun20i-d1-ccu";
reg = <0x2001000 0x1000>;
--
2.25.1