On Tue, May 30, 2023 at 02:03:30PM +0200, Oleksij Rempel wrote:

This patchset consists of several updates that address issues on
Protonic Holland's supported i.MX6-based devices, with a particular
focus on the USB subsystem configuration, thermal zones, and the naming
of GPIO keys. Some of these changes include the activation of USB over-
current detection on certain ports, the disabling of unused USB PHY
nodes, fixing USB-related warnings, adding trip points to thermal zones
on several devices, and renaming the 'power' key to meet the necessary
conventions.

David Jander (1):
  ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion

Oleksij Rempel (11):
  ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
  ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG
    node
  ARM: dts: imx6dl: Add trip points to thermal zones on several devices
  ARM: dts: imx6dl: vicut1: Address USB related warnings
  ARM: dts: imx6dl: alti6p: fix different USB related warnings
  ARM: dts: imx6dl: prtmvt: fix different USB related warnings
  ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG
    port
  ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG
    port
  ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG
    port
  ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related
    warnings
  ARM: dts: imx6qdl: vicut1: rename power to power-button

Robin van der Gracht (3):
  ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
  ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
  ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and
    MDC

Applied all, thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel