Thread (25 messages) 25 messages, 5 authors, 2023-03-17
STALE1226d
Revisions (5)
  1. v10 [diff vs current]
  2. v11 current
  3. v12 [diff vs current]
  4. v13 [diff vs current]
  5. v14 [diff vs current]

[PATCH v11 12/13] arm64: dts: ls1088a: Prevent PCSs from probing as phys

From: Sean Anderson <hidden>
Date: 2023-03-13 16:13:02
Also in: linux-devicetree, linux-phy, linuxppc-dev
Subsystem: arm/freescale layerscape arm architecture, the rest · Maintainers: Frank Li, Linus Torvalds

The internal PCSs are not always accessible during boot (such as if the
serdes has deselected the appropriate link mode). Give them appropriate
compatible strings so they don't automatically (fail to) probe as
genphys.

Signed-off-by: Sean Anderson <redacted>

---

(no changes since v8)

Changes in v8:
- New

 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 30 ++++++++++++-------
 1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 59b401daad4d..bbc714f84577 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -932,7 +932,8 @@ pcs_mdio1: mdio@8c07000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs1: ethernet-phy@0 {
+			pcs1: ethernet-pcs@0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 		};
@@ -945,7 +946,8 @@ pcs_mdio2: mdio@8c0b000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs2: ethernet-phy@0 {
+			pcs2: ethernet-pcs@0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 		};
@@ -958,19 +960,23 @@ pcs_mdio3: mdio@8c0f000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs3_0: ethernet-phy@0 {
+			pcs3_0: ethernet-pcs@0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 
-			pcs3_1: ethernet-phy@1 {
+			pcs3_1: ethernet-pcs@1 {
+				compatible = "fsl,lynx-pcs";
 				reg = <1>;
 			};
 
-			pcs3_2: ethernet-phy@2 {
+			pcs3_2: ethernet-pcs@2 {
+				compatible = "fsl,lynx-pcs";
 				reg = <2>;
 			};
 
-			pcs3_3: ethernet-phy@3 {
+			pcs3_3: ethernet-pcs@3 {
+				compatible = "fsl,lynx-pcs";
 				reg = <3>;
 			};
 		};
@@ -983,19 +989,23 @@ pcs_mdio7: mdio@8c1f000 {
 			#size-cells = <0>;
 			status = "disabled";
 
-			pcs7_0: ethernet-phy@0 {
+			pcs7_0: ethernet-pcs@0 {
+				compatible = "fsl,lynx-pcs";
 				reg = <0>;
 			};
 
-			pcs7_1: ethernet-phy@1 {
+			pcs7_1: ethernet-pcs@1 {
+				compatible = "fsl,lynx-pcs";
 				reg = <1>;
 			};
 
-			pcs7_2: ethernet-phy@2 {
+			pcs7_2: ethernet-pcs@2 {
+				compatible = "fsl,lynx-pcs";
 				reg = <2>;
 			};
 
-			pcs7_3: ethernet-phy@3 {
+			pcs7_3: ethernet-pcs@3 {
+				compatible = "fsl,lynx-pcs";
 				reg = <3>;
 			};
 		};
-- 
2.35.1.1320.gc452695387.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help