[PATCH v5 2/5] pinctrl: s32cc: refactor pin config parsing
From: Chester Lin <hidden>
Date: 2023-03-27 06:28:37
Also in:
linux-gpio, lkml
Subsystem:
arm/nxp s32g architecture, pin control subsystem, pin controller - freescale, the rest · Maintainers:
Linus Walleij, Dong Aisheng, Fabio Estevam, Frank Li, Jacky Bai, Linus Torvalds
Move common codes into smaller inline functions and remove argument checks that are not actually used by pull up/down bits in the S32 MSCR register. Signed-off-by: Chester Lin <redacted> Reviewed-by: Andy Shevchenko <redacted> --- (No change since v3) drivers/pinctrl/nxp/pinctrl-s32cc.c | 52 ++++++++++++++++++----------- 1 file changed, 33 insertions(+), 19 deletions(-)
diff --git a/drivers/pinctrl/nxp/pinctrl-s32cc.c b/drivers/pinctrl/nxp/pinctrl-s32cc.c
index f698e1a240ef..36f323f87785 100644
--- a/drivers/pinctrl/nxp/pinctrl-s32cc.c
+++ b/drivers/pinctrl/nxp/pinctrl-s32cc.c@@ -474,11 +474,38 @@ static int s32_get_slew_regval(int arg) return -EINVAL; } -static int s32_get_pin_conf(enum pin_config_param param, u32 arg, - unsigned int *mask, unsigned int *config) +static inline void s32_pin_set_pull(enum pin_config_param param, + unsigned int *mask, unsigned int *config) { + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE); + break; + case PIN_CONFIG_BIAS_PULL_UP: + *config |= S32_MSCR_PUS | S32_MSCR_PUE; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + *config &= ~S32_MSCR_PUS; + *config |= S32_MSCR_PUE; + break; + default: + return; + } + + *mask |= S32_MSCR_PUS | S32_MSCR_PUE; +} + +static int s32_parse_pincfg(unsigned long pincfg, unsigned int *mask, + unsigned int *config) +{ + enum pin_config_param param; + u32 arg; int ret; + param = pinconf_to_config_param(pincfg); + arg = pinconf_to_config_argument(pincfg); + switch (param) { /* All pins are persistent over suspend */ case PIN_CONFIG_PERSIST_STATE:
@@ -508,26 +535,15 @@ static int s32_get_pin_conf(enum pin_config_param param, u32 arg, *config |= S32_MSCR_SRE((u32)ret); *mask |= S32_MSCR_SRE(~0); break; + case PIN_CONFIG_BIAS_DISABLE: case PIN_CONFIG_BIAS_PULL_UP: - if (arg) - *config |= S32_MSCR_PUS; - else - *config &= ~S32_MSCR_PUS; - fallthrough; case PIN_CONFIG_BIAS_PULL_DOWN: - if (arg) - *config |= S32_MSCR_PUE; - else - *config &= ~S32_MSCR_PUE; - *mask |= S32_MSCR_PUE | S32_MSCR_PUS; + s32_pin_set_pull(param, mask, config); break; case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: *config &= ~(S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE); *mask |= S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE; - fallthrough; - case PIN_CONFIG_BIAS_DISABLE: - *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE); - *mask |= S32_MSCR_PUS | S32_MSCR_PUE; + s32_pin_set_pull(param, mask, config); break; default: return -EOPNOTSUPP;
@@ -553,9 +569,7 @@ static int s32_pinconf_mscr_update(struct pinctrl_dev *pctldev, pin_get_name(pctldev, pin_id), num_configs); for (i = 0; i < num_configs; i++) { - ret = s32_get_pin_conf(pinconf_to_config_param(configs[i]), - pinconf_to_config_argument(configs[i]), - &mask, &config); + ret = s32_parse_pincfg(configs[i], &mask, &config); if (ret) return ret; }
--
2.37.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel