Re: [PATCH v29 1/7] dt-bindings: mediatek: add ethdr definition for mt8195

Il 17/03/23 10:52, Nancy Lin (林欣螢) ha scritto:

On Fri, 2023-03-17 at 10:37 +0100, AngeloGioacchino Del Regno wrote:

quoted

Il 17/03/23 10:03, Krzysztof Kozlowski ha scritto:

quoted

On 17/03/2023 08:55, Nancy Lin (林欣螢) wrote:

quoted

On Thu, 2023-03-16 at 12:36 +0100, Krzysztof Kozlowski wrote:

quoted

On 16/03/2023 10:53, AngeloGioacchino Del Regno wrote:

quoted

Hello Krzysztof, Nancy,

Since this series has reached v29, can we please reach an
agreement
on the bindings
to use here, so that we can get this finally upstreamed?

I will put some examples to try to get this issue resolved.

### Example 1: Constrain the number of GCE entries to *seven*
array
elements (7x4!)

     mediatek,gce-client-reg:
       $ref: /schemas/types.yaml#/definitions/phandle-array
       maxItems: 1
       description: The register of display function block to
be set
by gce.
         There are 4 arguments in this property, gce node,
subsys id,
offset and
         register size. The subsys id is defined in the gce
header of
each chips
         include/dt-bindings/gce/<chip>-gce.h, mapping to the
register of display
         function block.
       items:
         minItems: 28
         maxItems: 28
         items:                     <----- this block doesn't
seem to
get checked :\
           - description: phandle of GCE
           - description: GCE subsys id
           - description: register offset
           - description: register size

This is what we would like to have but it requires exception in
dtschema. Thus:

quoted

### Example 2: Don't care about constraining the number of
arguments

     mediatek,gce-client-reg:
       $ref: /schemas/types.yaml#/definitions/phandle-array
       maxItems: 1
       description: The register of display function block to
be set
by gce.
         There are 4 arguments in this property, gce node,
subsys id,
offset and
         register size. The subsys id is defined in the gce
header of
each chips
         include/dt-bindings/gce/<chip>-gce.h, mapping to the
register of display
         function block.

use this.

Best regards,
Krzysztof

Hi Krzysztof, Angelo,

Thanks for the comment.
The Example 2 can pass dt_binding_check.

But the example in the binding has 7 items [1] and dts [2]. Does
the
"maxItems: 1" affect any other schema or dts check?

Ah, then it should be maxItems: 7, not 1.

Keep in mind for your v30:

maxItems: 7 will pass - but only if minItems is *not* 7 :-)

-> (so, do not declare minItems, as default is 1) <-

Regards,
Angelo

Hi Angelo,

I still have one message [1] when runing dt_binding_check for "example
2 + maxItems: 7" [2].

[1]
/proj/mtk19347/cros/src/third_party/kernel/v5.10/Documentation/devicetr
ee/bindings/display/mediatek/mediatek,ethdr.example.dtb:
hdr-engine@1c114000: mediatek,gce-client-reg: [[4294967295, 7, 16384,
4096, 4294967295, 7, 20480, 4096, 4294967295, 7, 28672, 4096,
4294967295, 7, 36864, 4096, 4294967295, 7, 40960, 4096, 4294967295, 7,
45056, 4096, 4294967295, 7, 49152, 4096]] is too short


[2]
    mediatek,gce-client-reg:
      $ref: /schemas/types.yaml#/definitions/phandle-array
      maxItems: 7
      description: The register of display function block to be set by
gce.
        There are 4 arguments in this property, gce node, subsys id,
offset and
        register size. The subsys id is defined in the gce header of
each chips
        include/dt-bindings/gce/<chip>-gce.h, mapping to the register of
display
        function block.

Maybe I'm wrong about the "do not declare minItems"... try with

minItems: 1
maxItems: 7


...does it work now?

Regards,
Nancy

quoted

quoted

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel