Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card
From: Marek Vasut <marex@denx.de>
Date: 2023-02-22 18:39:43
Also in:
linux-devicetree, lkml
On 2/22/23 18:59, Marco Felsch wrote:
Hi Luca, On 23-02-22, Luca Ceresoli wrote:quoted
The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an NXPP SGTL5000 audio codec connected to I2S-0 (sai2). This requires to: * add the power supplies (always on) * enable sai2 with pinmuxes * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> --- .../dts/freescale/imx8mp-msc-sm2s-ep1.dts | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+)diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts index 470ff8e31e32..894d9809f76d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts@@ -14,6 +14,57 @@ / { compatible = "avnet,sm2s-imx8mp-14N0600E-ep1", "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp", "fsl,imx8mp";...quoted
+/* I2S-0 = sai2 */ +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + + assigned-clocks = <&clk IMX8MP_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + + fsl,sai-mclk-direction-output; + status = "okay"; };Do you have some downstream patches for the sai interfaces? AFAIR Marek worked on this but the patches are not mainlien yet.
I guess it is time to resubmit these. _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel