Re: [PATCH 6/6] arm64: dts: imx8mm-kontron: Add support for reading SD_VSEL signal
From: Marco Felsch <hidden>
Date: 2023-02-13 16:16:05
Also in:
linux-devicetree, lkml
Hi Frieder, thanks for the patch. On 23-02-13, Frieder Schrempf wrote:
quoted hunk ↗ jump to hunk
From: Frieder Schrempf <redacted> This fixes the LDO5 regulator handling of the pca9450 driver by taking the status of the SD_VSEL into account to determine which configuration register is used for the voltage setting. Even without this change there is no functional issue, as the code for switching the voltage in sdhci.c currently switches both, the VSELECT/SD_VSEL signal and the regulator voltage at the same time and doesn't run into an invalid corner case. We should still make sure, that we always use the correct register when controlling the regulator. At least in U-Boot this fixes an actual bug where the wrong IO voltage is used. Signed-off-by: Frieder Schrempf <redacted> --- arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts | 6 +++--- arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts | 6 +++--- arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi | 1 + arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi | 1 + 4 files changed, 8 insertions(+), 6 deletions(-)diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts index 8b16bd68576c..bdcd9cd843c7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts@@ -344,7 +344,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x400001d0 >; };@@ -357,7 +357,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x400001d0 >; };@@ -370,7 +370,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x400001d0 >; }; };diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts index a079322a3793..ba2a4491cf31 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts@@ -321,7 +321,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x400001d0 >; };@@ -334,7 +334,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x400001d0 >; };@@ -347,7 +347,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x400001d0
The VSELECT pin should be driven by the (u)sdhc core...
quoted hunk ↗ jump to hunk
>; }; };diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi index 5172883717d1..90daaf54e704 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi@@ -196,6 +196,7 @@ reg_nvcc_sd: LDO5 { regulator-name = "NVCC_SD (LDO5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
and by using the sd-vsel-gpios property the IOMUXC_GPIO1_IO04 have to be muxed as GPIO, which is not the case. So I think that u-boot have a bug within the (u)sdhc core. Regards, Marco
quoted hunk ↗ jump to hunk
}; }; };diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi index 1f8326613ee9..7468a8aa771d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi@@ -195,6 +195,7 @@ reg_nvcc_sd: LDO5 { regulator-name = "NVCC_SD (LDO5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; }; };-- 2.39.1
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel