[PATCH v3 0/5] Bluetooth: hci_mrvl: Add serdev support for 88W8997

From: Francesco Dolcini <redacted>

Add serdev support for the 88W8997 from NXP (previously Marvell). It includes
support for changing the baud rate. The command to change the baud rate is
taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth
interfaces) from NXP.

v3:
 - Use __hci_cmd_sync_status instead of __hci_cmd_sync 

v2:
 - Fix the subject as pointed out by Krzysztof. Thanks!
 - Fix indentation in marvell-bluetooth.yaml
 - Fix compiler warning for kernel builds without CONFIG_OF enabled

Stefan Eichenberger (5):
  dt-bindings: bluetooth: marvell: add 88W8997
  dt-bindings: bluetooth: marvell: add max-speed property
  Bluetooth: hci_mrvl: use maybe_unused macro for device tree ids
  Bluetooth: hci_mrvl: Add serdev support for 88W8997
  arm64: dts: imx8mp-verdin: add 88W8997 serdev to uart4

 .../bindings/net/marvell-bluetooth.yaml       | 20 ++++-
 .../dts/freescale/imx8mp-verdin-wifi.dtsi     |  5 ++
 drivers/bluetooth/hci_mrvl.c                  | 90 ++++++++++++++++---
 3 files changed, 104 insertions(+), 11 deletions(-)

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel