Thread (26 messages) read the whole thread 26 messages, 5 authors, 2023-02-14
STALE1263d

Revision v2 of 5 in this series.

Revisions (5)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 [diff vs current]

[PATCH v2 00/11] soc: qcom: add UCSI function to PMIC GLINK

From: Neil Armstrong <neil.armstrong@linaro.org>
Date: 2023-02-10 15:02:31
Also in: linux-arm-msm, linux-devicetree, linux-usb, lkml

The PMIC GLINK interface offers an UCSI endpoint for newer
SoCs, the UCSI exchange is necessary to configure the USB-C
port USB role and altmode on the SM8450 HDK and SM8550 MTP
boards.
Since the DT description is the same, support for SM8350 HDK
is also added.

This patchset focuses on USB and disables altmode support
on those 2 SoCs until DP altmode over the combo phy is
supported.

Depends on PMIC Glink patchset at [1].

[1] https://lore.kernel.org/all/20230130042003.577063-1-quic_bjorande@quicinc.com/ (local)

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v2:
- Moved the dwc3 port subnodes to dtsi
- Added SM8350 HDK support
- Added help about ucsi module name
- Added bindings acks
- Fixed sm8550 pmic glink compatible
- Added more description in config update patch
- Link to v1: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v1-0-0b0acfad301e@linaro.org (local)

---
Neil Armstrong (11):
      usb: typec: ucsi: add PMIC Glink UCSI driver
      dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible
      dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible
      soc: qcom: pmic_glink: register ucsi aux device
      arm64: dts: qcom: sm8350: add port subnodes in dwc3 node
      arm64: dts: qcom: sm8450: add port subnodes in dwc3 node
      arm64: dts: qcom: sm8550: add port subnodes in dwc3 node
      arm64: dts: qcom: sm8350-hdk: add pmic glink node
      arm64: dts: qcom: sm8450-hdk: add pmic glink node
      arm64: dts: qcom: sm8550-mtp: add pmic glink node
      arm64: defconfig: add PMIC GLINK modules

 .../bindings/soc/qcom/qcom,pmic-glink.yaml         |   2 +
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts            |  77 ++++-
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |  19 ++
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts            |  45 ++-
 arch/arm64/boot/dts/qcom/sm8450.dtsi               |  19 ++
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts            |  45 ++-
 arch/arm64/boot/dts/qcom/sm8550.dtsi               |  19 ++
 arch/arm64/configs/defconfig                       |   4 +
 drivers/soc/qcom/pmic_glink.c                      |  67 ++++-
 drivers/usb/typec/ucsi/Kconfig                     |  10 +
 drivers/usb/typec/ucsi/Makefile                    |   1 +
 drivers/usb/typec/ucsi/ucsi_glink.c                | 320 +++++++++++++++++++++
 12 files changed, 604 insertions(+), 24 deletions(-)
---
base-commit: 2746a238ae3ea7215b3e95b78020a3d72243d55f
change-id: 20230130-topic-sm8450-upstream-pmic-glink-3b3a0b7bcd33

Best regards,
-- 
Neil Armstrong [off-list ref]


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help