---
 .../bindings/fpga/xilinx-pr-decoupler.txt     | 54 -------------
 .../bindings/fpga/xlnx,pr-decoupler.yaml      | 76 +++++++++++++++++++
 2 files changed, 76 insertions(+), 54 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
 create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml

diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
deleted file mode 100644
index 0acdfa6d62a4..000000000000
--- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
+++ /dev/null

@@ -1,54 +0,0 @@
-Xilinx LogiCORE Partial Reconfig Decoupler Softcore
-
-The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
-decouplers / fpga bridges.
-The controller can decouple/disable the bridges which prevents signal
-changes from passing through the bridge.  The controller can also
-couple / enable the bridges which allows traffic to pass through the
-bridge normally.
-
-Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager
-Softcore is compatible with the Xilinx LogiCORE pr-decoupler.
-
-The Dynamic Function eXchange AXI shutdown manager prevents AXI traffic
-from passing through the bridge. The controller safely handles AXI4MM
-and AXI4-Lite interfaces on a Reconfigurable Partition when it is
-undergoing dynamic reconfiguration, preventing the system deadlock
-that can occur if AXI transactions are interrupted by DFX
-
-The Driver supports only MMIO handling. A PR region can have multiple
-PR Decouplers which can be handled independently or chained via decouple/
-decouple_status signals.
-
-Required properties:
-- compatible		: Should contain "xlnx,pr-decoupler-1.00" followed by
-                          "xlnx,pr-decoupler" or
-                          "xlnx,dfx-axi-shutdown-manager-1.00" followed by
-                          "xlnx,dfx-axi-shutdown-manager"
-- regs			: base address and size for decoupler module
-- clocks		: input clock to IP
-- clock-names		: should contain "aclk"
-
-See Documentation/devicetree/bindings/fpga/fpga-region.txt and
-Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-Partial Reconfig Decoupler:
-	fpga-bridge@100000450 {
-		compatible = "xlnx,pr-decoupler-1.00",
-			     "xlnx-pr-decoupler";
-		regs = <0x10000045 0x10>;
-		clocks = <&clkc 15>;
-		clock-names = "aclk";
-		bridge-enable = <0>;
-	};
-
-Dynamic Function eXchange AXI shutdown manager:
-	fpga-bridge@100000450 {
-		compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
-			     "xlnx,dfx-axi-shutdown-manager";
-		regs = <0x10000045 0x10>;
-		clocks = <&clkc 15>;
-		clock-names = "aclk";
-		bridge-enable = <0>;
-	};

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
new file mode 100644
index 000000000000..caea58a9ba7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,pr-decoupler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown manager Softcore
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: The Xilinx LogiCORE Partial Reconfig Decoupler manages one
+          or more decouplers / fpga bridges. The controller can decouple/disable
+          the bridges which prevents signal changes from passing through the
+          bridge. The controller can also couple / enable the bridges which
+          allows traffic to pass through the bridge normally.