Re: [PATCH V3 1/2] net: phylink: add a function to resume phy alone to fix resume issue with WoL enabled

From
Jakub Kicinski <kuba@kernel.org>
Date
2023-02-03 05:24:46
Also in
lkml, netdev
Reply to
Clark Wang, 2023-02-02
On Thu,  2 Feb 2023 16:15:59 +0800 Clark Wang wrote:
Issue we met:
On some platforms, mac cannot work after resumed from the suspend with WoL
enabled.

The cause of the issue:
1. phylink_resolve() is in a workqueue which will not be executed immediately.
   This is the call sequence:
       phylink_resolve()->phylink_link_up()->pl->mac_ops->mac_link_up()
   For stmmac driver, mac_link_up() will set the correct speed/duplex...
   values which are from link_state.
2. In stmmac_resume(), it will call stmmac_hw_setup() after called the
   phylink_resume(), because mac need phy rx_clk to do the reset.
   stmmac_core_init() is called in function stmmac_hw_setup(), which will
   reset the mac and set the speed/duplex... to default value.
Conclusion: Because phylink_resolve() cannot determine when it is called, it
            cannot be guaranteed to be called after stmmac_core_init().
	    Once stmmac_core_init() is called after phylink_resolve(),
	    the mac will be misconfigured and cannot be used.

In order to avoid this problem, add a function called phylink_phy_resume()
to resume phy separately. This eliminates the need to call phylink_resume()
before stmmac_hw_setup().

Add another judgement before called phy_start() in phylink_start(). This way
phy_start() will not be called multiple times when resumes. At the same time,
it may not affect other drivers that do not use phylink_phy_resume().

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Patch 2/2 never made it to the list. You'll need to repost.
While I have you - some minor nit picks:
quoted hunk ↗ jump to hunk
+/**
+ * phylink_phy_resume() - resume phy alone
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * In the MAC driver using phylink, if the MAC needs the clock of the phy
You use MAC in capital letters buy phy in lower case, be consistent.
+ * when it resumes, can call this function to resume the phy separately.
missing "it" ? Otherwise the sentence is missing a subject.
quoted hunk ↗ jump to hunk
+ * Then proceed to MAC resume operations.
+ */
+void phylink_phy_resume(struct phylink *pl)
+{
+	ASSERT_RTNL();
+
+	if (!test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state)
+	    && pl->phydev) {
&& goes at the end of the line, not start
quoted hunk ↗ jump to hunk
+		phy_start(pl->phydev);
+		pl->mac_resume_phy_separately = true;
+	}
+
+}
+EXPORT_SYMBOL_GPL(phylink_phy_resume);
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Thread (12 messages) 12 messages, 5 authors, last reply 2023-08-16
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help