Thread (4 messages) 4 messages, 2 authors, 2023-01-30
STALE1261d
Revisions (3)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 current

[PATCH v3 0/2] media: i2c: add imx415 cmos image sensor driver

From: Michael Riesch <hidden>
Date: 2023-01-30 08:47:30
Also in: linux-devicetree, linux-media, lkml

Hi all,

This series adds a driver for the Sony IMX415 CMOS image sensor.
The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type
solid-state image sensor with a square pixel array and 8.46 M effective
pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface
1.8 V triple power supply, and has low power consumption.
The IMX415 is programmable through I2C interface. The sensor output is
available via CSI-2 serial data output (two or four lanes).

Version 2 of this series fixes the port description in the devicetree
binding as pointed out by Rob Herring.

Version 3 addresses the comments by Sakari Ailus, Marco Felsch and Rob
Herring.

Looking forward to your comments!

Best regards,
Michael

Gerald Loacker (1):
  media: i2c: add imx415 cmos image sensor driver

Michael Riesch (1):
  dt-bindings: media: i2c: add imx415 cmos image sensor

 .../bindings/media/i2c/sony,imx415.yaml       |  122 ++
 MAINTAINERS                                   |    8 +
 drivers/media/i2c/Kconfig                     |   14 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/imx415.c                    | 1300 +++++++++++++++++
 5 files changed, 1445 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
 create mode 100644 drivers/media/i2c/imx415.c


base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help