Thread (7 messages) 7 messages, 2 authors, 2023-01-22
STALE1273d
Revisions (5)
  1. v8 [diff vs current]
  2. v9 current
  3. v10 [diff vs current]
  4. v11 [diff vs current]
  5. v12 [diff vs current]

[PATCH v9 0/5] PCI: add 4x lane support for pci-j721e controllers

From: Achal Verma <hidden>
Date: 2023-01-22 12:21:52
Also in: linux-devicetree, linux-omap, linux-pci, lkml

Adding of additional support to Cadence PCIe controller (i.e. pci-j721e.c)
for up to 4x lanes, and reworking of driver to define maximum lanes per
board configuration.

Changes from v1:
* Reworked 'PCI: j721e: Add PCIe 4x lane selection support' to not cause
  regressions on 1-2x lane platforms

Changes from v2:
* Correct dev_warn format string from %d to %u since lane count is a
  unsigned integer
* Update CC list

Changes from v3:
* Use the max_lanes setting per chip for the mask size required since
  bootloader could have set num_lanes to a higher value that the
  device tree which would leave in an undefined state
* Reorder patches do the previous change to not break bisect
* Remove line breaking for dev_warn to allow better grepping and since
  no strict 80 columns anymore

Changes from v4:
* Correct invalid settings for j7200 PCIe RC + EP
* Add j784s4 configuration for selection of 4x lanes

Changes from v5:
* Dropped 'PCI: j721e: Add warnings on num-lanes misconfiguration' patch
  from series
* Reworded 'PCI: j721e: Add per platform maximum lane settings' commit
  message
* Added yaml documentation and schema checks for ti,j721e-pci-* lane
  checking

Changes from v6:
* Fix wordwrapping in commit messages from ~65 columns to correct 75
  columns
* Re-ran get_maintainers.pl to add missing maintainers in CC

Changes from v7:
* Addressed review comments in ti,j721e-pci-ep.yaml and
  ti,j721e-pci-host.yaml from v6
* Added warn message if num-lanes property value is invalid.
* Addressed build issue reported in
  https://lore.kernel.org/all/202211260346.4JvNnDdc-lkp@intel.com/ (local)

Changes from v8:
* Use "const: 1" in ti,j721e-pci-ep.yaml and ti,j721e-pci-host.yaml
  when num-lanes min and max values are equal.

Matt Ranostay (5):
  dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes
  PCI: j721e: Add per platform maximum lane settings
  PCI: j721e: Add PCIe 4x lane selection support
  dt-bindings: PCI: ti,j721e-pci-*: add j784s4-pci-* compatible strings
  PCI: j721e: add j784s4 PCIe configuration

 .../bindings/pci/ti,j721e-pci-ep.yaml         | 39 ++++++++++++++--
 .../bindings/pci/ti,j721e-pci-host.yaml       | 39 ++++++++++++++--
 drivers/pci/controller/cadence/pci-j721e.c    | 45 ++++++++++++++++---
 3 files changed, 112 insertions(+), 11 deletions(-)

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help