Thread (5 messages) 5 messages, 3 authors, 2023-01-17

Re: [PATCH 02/18] clk: qcom: add the GCC driver for sa8775p

From: Konrad Dybcio <hidden>
Date: 2023-01-09 18:21:38
Also in: linux-arm-msm, linux-clk, linux-devicetree, linux-gpio, linux-iommu, linux-pm, lkml, netdev


On 9.01.2023 18:58, Konrad Dybcio wrote:

On 9.01.2023 18:44, Bartosz Golaszewski wrote:
quoted
From: Shazad Hussain <redacted>

Add support for the Global Clock Controller found in the QTI SA8775P
platforms.

Signed-off-by: Shazad Hussain <redacted>
[Bartosz: made the driver ready for upstream]
Co-developed-by: Bartosz Golaszewski <redacted>
Signed-off-by: Bartosz Golaszewski <redacted>
---
[...]
quoted
+
+static struct gdsc usb20_prim_gdsc = {
+	.gdscr = 0x1C004,
Please use lowercase hex literals outside #defines.
quoted
+	.pd = {
+		.name = "usb20_prim_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
[...]
quoted
+
+static const struct regmap_config gcc_sa8775p_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x472cffc,
This is faaaaar more than what your DT node specifies.

With these two fixed, LGTM:

Reviewed-by: Konrad Dybcio <redacted>

Konrad
quoted
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc gcc_sa8775p_desc = {
+	.config = &gcc_sa8775p_regmap_config,
+	.clks = gcc_sa8775p_clocks,
+	.num_clks = ARRAY_SIZE(gcc_sa8775p_clocks),
+	.resets = gcc_sa8775p_resets,
+	.num_resets = ARRAY_SIZE(gcc_sa8775p_resets),
+	.gdscs = gcc_sa8775p_gdscs,
+	.num_gdscs = ARRAY_SIZE(gcc_sa8775p_gdscs),
+};
+
+static const struct of_device_id gcc_sa8775p_match_table[] = {
+	{ .compatible = "qcom,gcc-sa8775p" },
One more thing, this should be qcom,sa8775p-gcc.

Konrad
quoted
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gcc_sa8775p_match_table);
+
+static int gcc_sa8775p_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	int ret;
+
+	regmap = qcom_cc_map(pdev, &gcc_sa8775p_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
+				       ARRAY_SIZE(gcc_dfs_clocks));
+	if (ret)
+		return ret;
+
+	/*
+	 * Keep the clocks always-ON
+	 * GCC_CAMERA_AHB_CLK, GCC_CAMERA_XO_CLK, GCC_DISP1_AHB_CLK,
+	 * GCC_DISP1_XO_CLK, GCC_DISP_AHB_CLK, GCC_DISP_XO_CLK,
+	 * GCC_GPU_CFG_AHB_CLK, GCC_VIDEO_AHB_CLK, GCC_VIDEO_XO_CLK.
+	 */
+	regmap_update_bits(regmap, 0x32004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x32020, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0xc7004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0xc7018, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x33004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x33018, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x7d004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x34004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x34024, BIT(0), BIT(0));
+
+	return qcom_cc_really_probe(pdev, &gcc_sa8775p_desc, regmap);
+}
+
+static struct platform_driver gcc_sa8775p_driver = {
+	.probe = gcc_sa8775p_probe,
+	.driver = {
+		.name = "gcc-sa8775p",
+		.of_match_table = gcc_sa8775p_match_table,
+	},
+};
+
+static int __init gcc_sa8775p_init(void)
+{
+	return platform_driver_register(&gcc_sa8775p_driver);
+}
+subsys_initcall(gcc_sa8775p_init);
+
+static void __exit gcc_sa8775p_exit(void)
+{
+	platform_driver_unregister(&gcc_sa8775p_driver);
+}
+module_exit(gcc_sa8775p_exit);
+
+MODULE_DESCRIPTION("Qualcomm SA8775P GCC driver");
+MODULE_LICENSE("GPL");
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help