Hi Krzysztof,

On Thu, Dec 22, 2022 at 12:28:31PM +0100, Krzysztof Kozlowski wrote:

On 21/12/2022 08:32, Chester Lin wrote:

quoted

Add DT schema for the pinctrl driver of NXP S32 SoC family.

Signed-off-by: Larisa Grigore <redacted>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
Signed-off-by: Chester Lin <redacted>
---

Changes in v3:
- Remove the minItems from reg because there's no optional item for s32g2.
- List supported properties of pinmux-node and pincfg-node and add more
  descriptions.
- Adjust the location of "required:".
- Fix descriptions and wordings.
- Rename the yaml file to nxp,s32g2-siul2-pinctrl.yaml.

Changes in v2:
- Remove the "nxp,pins" property since it has been moved into the driver.
- Add descriptions for reg entries.
- Refine the compatible name from "nxp,s32g-..." to "nxp,s32g2-...".
- Fix schema issues and revise the example.
- Fix the copyright format suggested by NXP.

 .../pinctrl/nxp,s32g2-siul2-pinctrl.yaml      | 129 ++++++++++++++++++
 1 file changed, 129 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
new file mode 100644
index 000000000000..1554ce14214a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml

@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32G2 pin controller
+
+maintainers:
+  - Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
+  - Chester Lin <clin@suse.com>
+
+description: |
+  S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2),
+  whose memory map is split into two regions:
+    SIUL2_0 @ 0x4009c000
+    SIUL2_1 @ 0x44010000
+
+  Every SIUL2 region has multiple register types, and here only MSCR and
+  IMCR registers need to be revealed for kernel to configure pinmux.
+
+  Please note that some register indexes are reserved in S32G2, such as
+  MSCR102-MSCR111, MSCR123-MSCR143, IMCR84-IMCR118 and IMCR398-IMCR429.
+
+properties:
+  compatible:
+    enum:
+      - nxp,s32g2-siul2-pinctrl
+
+  reg:
+    description: |
+      A list of MSCR/IMCR register regions to be reserved.
+      - MSCR (Multiplexed Signal Configuration Register)
+        An MSCR register can configure the associated pin as either a GPIO pin
+        or a function output pin depends on the selected signal source.
+      - IMCR (Input Multiplexed Signal Configuration Register)
+        An IMCR register can configure the associated pin as function input
+        pin depends on the selected signal source.
+    items:
+      - description: MSCR registers group 0 in SIUL2_0
+      - description: MSCR registers group 1 in SIUL2_1
+      - description: MSCR registers group 2 in SIUL2_1
+      - description: IMCR registers group 0 in SIUL2_0
+      - description: IMCR registers group 1 in SIUL2_1
+      - description: IMCR registers group 2 in SIUL2_1
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-grp[0-9]$':
+        type: object
+        allOf:
+          - $ref: pinmux-node.yaml#
+          - $ref: pincfg-node.yaml#
+        description: |
+          Pinctrl node's client devices specify pin muxes using subnodes,
+          which in turn use the standard properties below.
+
+        properties:
+          bias-disable: true
+          bias-high-impedance: true
+          bias-pull-up: true
+          bias-pull-down: true
+          drive-open-drain: true
+          input-enable: true
+          output-enable: true
+
+          pinmux:
+            description: |
+               An integer array for representing pinmux configurations of
+               a device. Each integer consists of a PIN_ID and a 4-bit
+               selected signal source(SSS) as IOMUX setting, which is
+               calculated as: pinmux = (PIN_ID << 4 | SSS)
+
+          slew-rate:
+            description: |
+              0: 208MHz
+              1-3: Reserved
+              4: 166MHz
+              5: 150MHz
+              6: 133MHz
+              7: 83MHz
+            enum: [0, 4, 5, 6, 7]

You have known values, then use them. This is much more readable in DTS.

The main reason of mapping with register values [0-7] is to simplify the
driver implementation while handling register r/w. To improve readability
as you suggested, I am thinking of having a DT header "s32g2-pinfunc.h" with
a few binding macros/helper as below, the only difference compared to v3 is
using S32G2_PINMUX and S32G2_SLEW_XXXMHZ macros rather than pure integers
to represent pinmux and slew-rate property values.

Regards,
Chester


From 3a29d905ae104e694230ffc02dc9f9de4191c5d1 Mon Sep 17 00:00:00 2001
From: Chester Lin <redacted>
Date: Fri, 28 Oct 2022 16:44:29 +0800
Subject: [PATCH] dt-bindings: pinctrl: add support for NXP S32 SoCs

Add DT schema and hedaer file for the pinctrl driver of NXP S32 SoC family.

Signed-off-by: Larisa Grigore <redacted>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
Signed-off-by: Chester Lin <redacted>
---
 .../pinctrl/nxp,s32g2-siul2-pinctrl.yaml      | 136 ++++++++++++++++++
 include/dt-bindings/pinctrl/s32g2-pinfunc.h   |  17 +++
 2 files changed, 153 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
 create mode 100644 include/dt-bindings/pinctrl/s32g2-pinfunc.h

diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
new file mode 100644
index 000000000000..9083d299dd85
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml

@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32G2 pin controller
+
+maintainers:
+  - Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
+  - Chester Lin <clin@suse.com>
+
+description: |
+  S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2),
+  whose memory map is split into two regions:
+    SIUL2_0 @ 0x4009c000
+    SIUL2_1 @ 0x44010000
+
+  Every SIUL2 region has multiple register types, and here only MSCR and
+  IMCR registers need to be revealed for kernel to configure pinmux.
+
+  Please note that some register indexes are reserved in S32G2, such as
+  MSCR102-MSCR111, MSCR123-MSCR143, IMCR84-IMCR118 and IMCR398-IMCR429.
+
+properties:
+  compatible:
+    enum:
+      - nxp,s32g2-siul2-pinctrl
+
+  reg:
+    description: |
+      A list of MSCR/IMCR register regions to be reserved.
+      - MSCR (Multiplexed Signal Configuration Register)
+        An MSCR register can configure the associated pin as either a GPIO pin
+        or a function output pin depends on the selected signal source.
+      - IMCR (Input Multiplexed Signal Configuration Register)
+        An IMCR register can configure the associated pin as function input
+        pin depends on the selected signal source.
+    items:
+      - description: MSCR registers group 0 in SIUL2_0
+      - description: MSCR registers group 1 in SIUL2_1
+      - description: MSCR registers group 2 in SIUL2_1
+      - description: IMCR registers group 0 in SIUL2_0
+      - description: IMCR registers group 1 in SIUL2_1
+      - description: IMCR registers group 2 in SIUL2_1
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-grp[0-9]$':
+        type: object
+        allOf:
+          - $ref: pinmux-node.yaml#
+          - $ref: pincfg-node.yaml#
+        description: |
+          Pinctrl node's client devices specify pin muxes using subnodes,
+          which in turn use the standard properties below.
+
+        properties:
+          bias-disable: true
+          bias-high-impedance: true
+          bias-pull-up: true
+          bias-pull-down: true
+          drive-open-drain: true
+          input-enable: true
+          output-enable: true
+
+          pinmux:
+            description: |
+               An integer array for representing pinmux configurations of
+               a device. Each integer consists of a PIN_ID and a 4-bit
+               selected signal source(SSS) as IOMUX setting, which is
+               calculated as: pinmux = (PIN_ID << 4 | SSS)
+               It's recommended that using the helper macro S32G2_PINMUX()
+               defined in dt-bindings/pinctrl/s32g2-pinfunc.h in order to
+               assemble a pinmux value.
+
+          slew-rate:
+            description: |
+              0: 208MHz
+              1-3: Reserved
+              4: 166MHz
+              5: 150MHz
+              6: 133MHz
+              7: 83MHz
+              The available slew rates are defined as macros in
+              dt-bindings/pinctrl/s32g2-pinfunc.h.
+            enum: [0, 4, 5, 6, 7]
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/s32g2-pinfunc.h>
+
+    pinctrl@4009c240 {
+        compatible = "nxp,s32g2-siul2-pinctrl";
+
+              /* MSCR0-MSCR101 registers on siul2_0 */
+        reg = <0x4009c240 0x198>,
+              /* MSCR112-MSCR122 registers on siul2_1 */
+              <0x44010400 0x2c>,
+              /* MSCR144-MSCR190 registers on siul2_1 */
+              <0x44010480 0xbc>,
+              /* IMCR0-IMCR83 registers on siul2_0 */
+              <0x4009ca40 0x150>,
+              /* IMCR119-IMCR397 registers on siul2_1 */
+              <0x44010c1c 0x45c>,
+              /* IMCR430-IMCR495 registers on siul2_1 */
+              <0x440110f8 0x108>;
+
+        llce-can0-pins {
+            llce-can0-grp0 {
+                pinmux = <S32G2_PINMUX(43, 0)>;
+                input-enable;
+                slew-rate = <S32G2_SLEW_208MHZ>;
+            };
+
+            llce-can0-grp1 {
+                pinmux = <S32G2_PINMUX(44, 2)>;
+                output-enable;
+                slew-rate = <S32G2_SLEW_208MHZ>;
+            };
+        };
+    };
+...

diff --git a/include/dt-bindings/pinctrl/s32g2-pinfunc.h b/include/dt-bindings/pinctrl/s32g2-pinfunc.h
new file mode 100644
index 000000000000..f5abf0388547
--- /dev/null
+++ b/include/dt-bindings/pinctrl/s32g2-pinfunc.h

@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0-or-later) */
+/*
+ * Copyright 2022 NXP
+ */
+
+#ifndef _DT_BINDINGS_S32G2_PINFUNC_H
+#define _DT_BINDINGS_S32G2_PINFUNC_H
+
+#define S32G2_PINMUX(PIN, FUNC) (((PIN) << 4) | (FUNC))
+
+#define S32G2_SLEW_208MHZ	0
+#define S32G2_SLEW_166MHZ	4
+#define S32G2_SLEW_150MHZ	5
+#define S32G2_SLEW_133MHZ	6
+#define S32G2_SLEW_83MHZ	7
+
+#endif

-- 
2.37.3

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel