R528 and T113 are SoCs based on the same design as D1/D1s, but with ARM
CPUs instead of RISC-V. They use the same CCU implementation, meaning
the CCU has gates/resets for all peripherals present on any SoC in this
family. I verified the CAN bus bits are also present on D1/D1s.

Patches 1-2 clean up the Kconfig in preparation for patch 3, which
allows building the driver. Patches 4-6 add the missing binding header
and driver bits.

Changes in v2:
 - Expand commit message
 - Move dt-bindings header changes to a separate patch

András Szemző (1):
  clk: sunxi-ng: d1: Mark cpux clock as critical

Fabien Poussin (1):
  clk: sunxi-ng: d1: Add CAN bus gates and resets

Samuel Holland (4):
  clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies
  clk: sunxi-ng: Move SoC driver conditions to dependencies
  clk: sunxi-ng: d1: Allow building for R528/T113
  dt-bindings: clock: Add D1 CAN bus gates and resets

 drivers/clk/sunxi-ng/Kconfig              | 71 ++++++++++++-----------
 drivers/clk/sunxi-ng/ccu-sun20i-d1.c      | 13 ++++-
 drivers/clk/sunxi-ng/ccu-sun20i-d1.h      |  2 +-
 include/dt-bindings/clock/sun20i-d1-ccu.h |  2 +
 include/dt-bindings/reset/sun20i-d1-ccu.h |  2 +
 5 files changed, 53 insertions(+), 37 deletions(-)

-- 
2.37.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel